XK-Z11-M Digi International, XK-Z11-M Datasheet - Page 147

• Manufacturer Part Number: XK-Z11-M
• Description: ZIGBEE MODULE DEVELOPMENT KIT
• Manufacturer: Digi International
• Series: XBee™r
• Type: Transceiver, 802.15.4/ZigBeer

Specifications of XK-Z11-M

• Frequency: 2.4GHz
• For Use With/related Products: XBee Modules
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 602-1184

© 2010 Digi International, Inc.
XBee®/XBee‐PRO® ZB RF Modules
Antennas approved for use with the XBee®/XBee‐PRO® ZB RF Modules (Cable‐loss is not required.)
OMNI-DIRECTIONAL ANTENNAS for All Available Channels
Part Number
A24-HASM-450
A24-HABSM
A24-HABUF-P5I
A24-HASM-525
A24-QI
29000294
29000095
FCC-Approved Antennas (2.4 GHz)
If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures: Re-orient or relocate the receiving antenna, Increase the separation
between the equipment and receiver, Connect equipment and receiver to outlets on different circuits, or
Consult the dealer or an experienced radio/TV technician for help.
The XBee and XBee-PRO RF Module can be installed utilizing antennas and cables constructed with
standard connectors (Type-N, SMA, TNC, etc.) if the installation is performed professionally and according
to FCC guidelines. For installations not performed by a professional, non-standard connectors (RPSMA,
RPTNC, etc.) must be used.
The modules are FCC approved for fixed base station and mobile applications for the channels indicated in
the tables below. If the antenna is mounted at least 20cm (8 in.) from nearby persons, the application is
considered a mobile application. Antennas not listed in the table must be tested to comply with FCC Section
15.203 (Unique Antenna Connectors) and Section 15.247 (Emissions).
XBee RF Modules: XBee RF Modules have been tested and approved for use with all the antennas listed in
the tables below. (Cable-loss IS required when using gain antennas as shown below.)
The antennas in the tables below have been approved for use with this module. Digi does not carry all of
these antenna variants. Contact Digi Sales for available antennas.
Type (Description)
Dipole (Half-wave articulated RPSMA - 4.5”)
Dipole (Articulated RPSMA)
Dipole (Half-wave articulated bulkhead mount U.FL. w/ 5”
pigtail)
Dipole (Half-wave articulated RPSMA - 5.25")
Monopole (Integrated whip)
Integral PCB antenna (S2B only)
Dipole (Half-wave articulated RPSMA - 4.5”)
Gain
2.1 dBi
2.1 dBi
2.1 dBi
2.1 dBi
2.1 dBi
1.5 dBi
-0.5 dBi
Application*
Fixed/Mobile
Fixed/Mobile
Fixed/Mobile
Fixed
Fixed
Fixed
Fixed/Mobile
Min
Separation
20 cm
20 cm
20 cm
20 cm
20 cm
20 cm
20 cm
Minimum Cable
Loss/Power
Reduction/
Attenuation
Required
N/A
N/A
N/A
N/A
N/A
N/A
N/A
146