20-101-1221 Rabbit Semiconductor, 20-101-1221 Datasheet - Page 25

• Manufacturer Part Number: 20-101-1221
• Description: RCM4400W (JAPAN TELEC CERTIFIED)
• Manufacturer: Rabbit Semiconductor
• Series: RabbitCore®r

Specifications of 20-101-1221

• Frequency: 2.4GHz
• Modulation Or Protocol: 802.11 b
• Power - Output: 16dBm
• Voltage - Supply: 3.3V
• Current - Receiving: 450mA
• Current - Transmitting: 450mA
• Data Interface: Connector, 2 x 25 Header
• Memory Size: 512K Flash, 1MB SRAM
• Antenna Connector: SMA
• Operating Temperature: -20°C ~ 85°C
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Applications: -
• Sensitivity: -
• Data Rate - Maximum: -
• Other names: 316-1147

3.1 Introduction
To help familiarize you with the RCM4400W modules, Dynamic C includes several sam-
ple programs. Loading, executing and studying these programs will give you a solid
hands-on overview of the RCM4400W’s capabilities, as well as a quick start with
Dynamic C as an application development tool.
This chapter provides sample programs that illustrate the digital I/O and serial capabilities
of the RCM4400W RabbitCore module. Section 6.2.4 discusses the sample programs that
illustrate the Wi-Fi features.
In order to run the sample programs discussed in this chapter and elsewhere in this manual,
1. Your module must be plugged in to the Prototyping Board as described in Chapter 2,
2. Dynamic C must be installed and running on your PC.
3. The programming cable must connect the programming header on the module to your
4. Power must be applied to the module through the Prototyping Board.
Refer to Chapter 2, “Getting Started,” if you need further information on these steps.
To run a sample program, open it with the
F9
Each sample program has comments that describe the purpose and function of the pro-
gram. Follow the instructions at the beginning of the sample program.
Complete information on Dynamic C is provided in the Dynamic C User’s Manual.
OEM User’s Manual
.
“Getting Started.”
PC.
To develop and debug programs for the RCM4400W (and for all
other Rabbit hardware), you must install and use Dynamic C.
This chapter provides a tour of its major features with respect to
the RCM4400W.
NOTE: The sample programs assume that you have at least an elementary grasp of the C
language. If you do not, see the introductory pages of the Dynamic C User’s Manual
for a suggested reading list.
3. R
UNNING
File
S
menu, then compile and run it by pressing
AMPLE
P
ROGRAMS
19