20-101-1221 Rabbit Semiconductor, 20-101-1221 Datasheet - Page 66

• Manufacturer Part Number: 20-101-1221
• Description: RCM4400W (JAPAN TELEC CERTIFIED)
• Manufacturer: Rabbit Semiconductor
• Series: RabbitCore®r

Specifications of 20-101-1221

• Frequency: 2.4GHz
• Modulation Or Protocol: 802.11 b
• Power - Output: 16dBm
• Voltage - Supply: 3.3V
• Current - Receiving: 450mA
• Current - Transmitting: 450mA
• Data Interface: Connector, 2 x 25 Header
• Memory Size: 512K Flash, 1MB SRAM
• Antenna Connector: SMA
• Operating Temperature: -20°C ~ 85°C
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Applications: -
• Sensitivity: -
• Data Rate - Maximum: -
• Other names: 316-1147

3. Click
Infrastructure Mode (via wireless connection)
Set the IP address and netmask for your wireless-enabled PC or notebook as described in
Step 2 for
Connections
Connection
program is running, you will be able to select the network from a list of available networks.
You will have set your wireless network name with the
structure mode as explained in Section 6.2.3.1, “Network/Wi-Fi Configuration.”
Ad-Hoc Mode
Set the IP address and netmask for your wireless-enabled PC or notebook as described in
Step 2 for
Connections
Connection
program is running, you will be able to select the network from a list of available networks.
You will have set your wireless network name with the
the ad-hoc mode as explained in Section 6.2.3.1, “Network/Wi-Fi Configuration.”
60
2.
Now select the
Specify an IP Address
and click on “Properties” to fill in the fol-
lowing fields:
The IP address and netmask need to be set
regardless of whether you will be using the
ad-hoc mode or the infrastructure mode.
TIP: If you are using a PC that is already on
a network, you will disconnect the PC
from that network to run these sample
programs. Write down the existing set-
tings before changing them so that you
can restore them easily when you are fin-
ished with the sample programs.
IP Address : 10.10.6.101
Netmask : 255.255.255.0
Default gateway : 10.10.6.1
<OK>
Infrastructure Mode (via Ethernet connection)
Infrastructure Mode (via Ethernet connection)
to select the wireless network you will be connecting to. Once a sample
to select the wireless network you will be connecting to. Once a sample
, then on
, then on
or
IP Address
<Close>
Local Area Connection
Local Area Connection
, or select TCP/IP
to exit the various dialog boxes.
tab, and check
. Now click on
. Now click on
_WIFI_OWNCHANNEL
_WIFI_SSID
by clicking on
by clicking on
Wireless Network
Wireless Network
RabbitCore RCM4400W
macro for the infra-
Network
Network
macros for