20-101-1221 Rabbit Semiconductor, 20-101-1221 Datasheet - Page 26

• Manufacturer Part Number: 20-101-1221
• Description: RCM4400W (JAPAN TELEC CERTIFIED)
• Manufacturer: Rabbit Semiconductor
• Series: RabbitCore®r

Specifications of 20-101-1221

• Frequency: 2.4GHz
• Modulation Or Protocol: 802.11 b
• Power - Output: 16dBm
• Voltage - Supply: 3.3V
• Current - Receiving: 450mA
• Current - Transmitting: 450mA
• Data Interface: Connector, 2 x 25 Header
• Memory Size: 512K Flash, 1MB SRAM
• Antenna Connector: SMA
• Operating Temperature: -20°C ~ 85°C
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Applications: -
• Sensitivity: -
• Data Rate - Maximum: -
• Other names: 316-1147

3.2 Sample Programs
Of the many sample programs included with Dynamic C, several are specific to the
RCM4400W modules. These programs will be found in the
•
•
•
20
CONTROLLED.C
DS2 and DS3 on the Prototyping Board on or off from the
Parallel Port B bit 2 = LED DS2
Parallel Port B bit 3 = LED DS3
Once you compile and run
Dynamic C
Press “2” or “3” on your keyboard to select LED DS2 or DS3 on the Prototyping
Board. Then follow the prompt in the Dynamic C
or OFF. A logic low will light up the LED you selected.
FLASHLED1.C
DS3 on the Prototyping Board at different rates. Once you have compiled and run this
program, LEDs DS2 and DS3 will flash on/off at different rates.
FLASHLED2.C
DS2 and DS3 on the Prototyping Board at different rates. Once you have compiled and
run this program, LEDs DS2 and DS3 will flash on/off at different rates.
STDIO
—demonstrates the use of assembly language to flash LEDs DS2 and
—demonstrates the use of cofunctions and costatements to flash LEDs
—Demonstrates use of the digital outputs by having you turn LEDs
window.
CONTROLLED.C
, the following display will appear in the
STDIO
SAMPLES\RCM4400W
window to turn the LED ON
STDIO
RabbitCore RCM4400W
window on your PC.
folder.