20-101-1221 Rabbit Semiconductor, 20-101-1221 Datasheet - Page 48

• Manufacturer Part Number: 20-101-1221
• Description: RCM4400W (JAPAN TELEC CERTIFIED)
• Manufacturer: Rabbit Semiconductor
• Series: RabbitCore®r

Specifications of 20-101-1221

• Frequency: 2.4GHz
• Modulation Or Protocol: 802.11 b
• Power - Output: 16dBm
• Voltage - Supply: 3.3V
• Current - Receiving: 450mA
• Current - Transmitting: 450mA
• Data Interface: Connector, 2 x 25 Header
• Memory Size: 512K Flash, 1MB SRAM
• Antenna Connector: SMA
• Operating Temperature: -20°C ~ 85°C
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Applications: -
• Sensitivity: -
• Data Rate - Maximum: -
• Other names: 316-1147

A program “runs” in either mode, but can only be downloaded and debugged when the
RCM4400W is in the Program Mode.
Refer to the
gramming port.
4.3.2 Standalone Operation of the RCM4400W
Once the RCM4400W has been programmed successfully, remove the programming cable
from the programming connector and reset the RCM4400W. The RCM4400W may be
reset by cycling, the power off/on or by pressing the
Board. The RCM4400W module may now be removed from the Prototyping Board for
end-use installation.
42
CAUTION: Power to the Prototyping Board or other boards should be disconnected
when removing or installing your RCM4400W module to protect against inadvertent
shorts across the pins or damage to the RCM4400W if the pins are not plugged in cor-
rectly. Do not reapply power until you have verified that the RCM4400W module is
plugged in correctly.
Rabbit 4000 Microprocessor User’s Manual
RESET
for more information on the pro-
button on the Prototyping
RabbitCore RCM4400W