GS-BT2416C2.AT1 STMicroelectronics, GS-BT2416C2.AT1 Datasheet - Page 19

• Manufacturer Part Number: GS-BT2416C2.AT1
• Description: BLUETOOTH CLASS 2 MODULE SPP
• Manufacturer: STMicroelectronics

Specifications of GS-BT2416C2.AT1

• Frequency: 2.4GHz
• Data Rate - Maximum: 721kbps
• Modulation Or Protocol: Bluetooth v1.2, Class 2
• Power - Output: 0dBm
• Sensitivity: -74dBm
• Voltage - Supply: 3.3V
• Current - Receiving: 50mA
• Current - Transmitting: 90mA
• Data Interface: PCB, Surface Mount
• Memory Size: 4Mb Flash, 64kBytes RAM
• Antenna Connector: PCB, Surface Mount
• Operating Temperature: -20°C ~ 70°C
• Package / Case: Module
• Processor Series: STLC2500
• Wireless Frequency: 2.4 GHz to 2.5 GHz
• Interface Type: SPI, I2C, UART, PCM
• Data Rate: 721 Kbps
• Modulation: USB, UART, PCM
• For Use With: 497-6224 - DEMO BOARD FOR GS-BT2416C2.ATI497-6223 - DEMO BOARD FOR GS-BT2416C2.H497-5792 - BOARD DEMO FOR CLASS 1 MODULES
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Applications: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 497-5791

GS-BT2416C2.AT1
A.7
A.8
A.9
AT + BTCMODE
Indicate if the module can be contacted by other Bluetooth devices. This command does not
register any SPP service.
AT+BTDMODE
Indicate if the module can be discovered when an inquiry procedure is performed by other
Bluetooth devices.
AT+BTPMODE
Indicate if the module will accept a pairing request incoming from a remote device. The
pairing procedure is necessary in order to authenticate two Bluetooth devices for the first
time.
Once two devices have been paired, authentication of devices is handled automatically
without the need of any re-pairing, unless link-keys are erased on purpose.
Syntax: AT+BTCMODE=<0,1>
Parameters:
0: The module cannot be contacted by other Bluetooth devices (default)
1: The module can be contacted by other Bluetooth devices
Return value: <OK, ERROR>
Syntax: AT+BTDMODE=<0,1>
Parameters:
0: The module cannot be discovered by other Bluetooth devices (default)
1: The module can be discovered by other Bluetooth devices
Return value: <OK, ERROR
Syntax: BTPMODE=<0,1>
Parameters
0: The module does not accept pairing requests from a remote Bluetooth device
(default)
1: The module accepts pairing requests coming from a remote Bluetooth device
Return value: <OK, ERROR>
AT command
19/32