GS-BT2416C2.AT1 STMicroelectronics, GS-BT2416C2.AT1 Datasheet - Page 21

• Manufacturer Part Number: GS-BT2416C2.AT1
• Description: BLUETOOTH CLASS 2 MODULE SPP
• Manufacturer: STMicroelectronics

Specifications of GS-BT2416C2.AT1

• Frequency: 2.4GHz
• Data Rate - Maximum: 721kbps
• Modulation Or Protocol: Bluetooth v1.2, Class 2
• Power - Output: 0dBm
• Sensitivity: -74dBm
• Voltage - Supply: 3.3V
• Current - Receiving: 50mA
• Current - Transmitting: 90mA
• Data Interface: PCB, Surface Mount
• Memory Size: 4Mb Flash, 64kBytes RAM
• Antenna Connector: PCB, Surface Mount
• Operating Temperature: -20°C ~ 70°C
• Package / Case: Module
• Processor Series: STLC2500
• Wireless Frequency: 2.4 GHz to 2.5 GHz
• Interface Type: SPI, I2C, UART, PCM
• Data Rate: 721 Kbps
• Modulation: USB, UART, PCM
• For Use With: 497-6224 - DEMO BOARD FOR GS-BT2416C2.ATI497-6223 - DEMO BOARD FOR GS-BT2416C2.H497-5792 - BOARD DEMO FOR CLASS 1 MODULES
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Applications: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 497-5791

GS-BT2416C2.AT1
A.13
A.14
A.15
A.16
AT+BTERASELK
Erase all link-keys. When all link-keys are erased the module is unpaired from all previously
paired devices.
AT+BTNAME
Set the local Bluetooth name. This name is the string shown to all other Bluetooth devices.
AT+BTCLASS
Set the local Bluetooth Class ID. The Class ID is a 24-bit integer value identifying the type of
device (PC, PDA, Headset, etc.)
AT+BTSETTINGS
Requests the current module settings. The command generates a +BTSETTINGS event.
Syntax: AT+BTERASELK
Return value: <OK, ERROR>
Syntax: AT+BTNAME=”DeviceName”
Parameters:
DeviceName: A string representing the name of the local device.
This string can be long up to 128 characters.
Return value: <OK, ERROR>
Syntax: AT+BTCLASS=DeviceClass
Parameters:
DeviceClass: 24-bit integer value indicating the local device class. This value is
interpreted as an unsigned hexadecimal 24-bit value
Return value: <OK, ERROR>
Syntax: AT+BTSETTINGS=?
Return value: +BTSETTINGS, <OK, ERROR>
AT command
21/32