GS-BT2416C2.AT1 STMicroelectronics, GS-BT2416C2.AT1 Datasheet - Page 20

• Manufacturer Part Number: GS-BT2416C2.AT1
• Description: BLUETOOTH CLASS 2 MODULE SPP
• Manufacturer: STMicroelectronics

Specifications of GS-BT2416C2.AT1

• Frequency: 2.4GHz
• Data Rate - Maximum: 721kbps
• Modulation Or Protocol: Bluetooth v1.2, Class 2
• Power - Output: 0dBm
• Sensitivity: -74dBm
• Voltage - Supply: 3.3V
• Current - Receiving: 50mA
• Current - Transmitting: 90mA
• Data Interface: PCB, Surface Mount
• Memory Size: 4Mb Flash, 64kBytes RAM
• Antenna Connector: PCB, Surface Mount
• Operating Temperature: -20°C ~ 70°C
• Package / Case: Module
• Processor Series: STLC2500
• Wireless Frequency: 2.4 GHz to 2.5 GHz
• Interface Type: SPI, I2C, UART, PCM
• Data Rate: 721 Kbps
• Modulation: USB, UART, PCM
• For Use With: 497-6224 - DEMO BOARD FOR GS-BT2416C2.ATI497-6223 - DEMO BOARD FOR GS-BT2416C2.H497-5792 - BOARD DEMO FOR CLASS 1 MODULES
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Applications: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 497-5791

AT command
A.10
A.11
A.12
20/32
AT+BTSECMODE
Indicate if the module requests the authentication upon the setup of a Bluetooth SPP link.
An authentication request translates into a pairing request if two devices have never been
paired before.
AT+BTENCMODE
Indicate if the module requests an encrypted link upon the setup of a Bluetooth SPP link.
AT+BTPINCODE
Set the pin code of the local module. The module’s pin code is used during a pairing
procedure. In order to be successful, the module’s pin code and the connection pin code
specified during a connection set-up must be identical. See AT+BTCONNECT for more
information.
Syntax: AT+BTSECMODE=<0,1>
Parameters:
0: The module does not request authentication
1: The module requests authentication
Return value: <OK, ERROR>
Syntax: AT+BTENCMODE=<0,1>
Parameters:
0: The module does not request encryption
1: The module requests encryption
Return value: <OK, ERROR>
Syntax: AT+BTPINCODE=”Pincode”
Parameters:
Pincode: 4 to 16-byte string representing the module’s pin code
Return value: <OK, ERROR>
GS-BT2416C2.AT1