LFXP2-5E-5FTN256C Lattice, LFXP2-5E-5FTN256C Datasheet - Page 42

• Manufacturer Part Number: LFXP2-5E-5FTN256C
• Description: FPGA - Field Programmable Gate Array 5K LUTs 172I/O Inst- on DSP 1.2V -5 Spd
• Manufacturer: Lattice
• Series: LatticeXP2r

Specifications of LFXP2-5E-5FTN256C

• Number Of Macrocells: 5000
• Maximum Operating Frequency: 200 MHz
• Number Of Programmable I/os: 172
• Data Ram Size: 10 KB
• Supply Voltage (max): 1.14 V
• Supply Current: 17 mA
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: 0 C
• Mounting Style: SMD/SMT
• Supply Voltage (min): 1.26 V
• Package / Case: FTBGA-256
• No. Of Logic Blocks: 5000
• No. Of Macrocells: 2500
• Family Type: LatticeXP2
• No. Of Speed Grades: 5
• Total Ram Bits: 166Kbit
• No. Of I/o's: 172
• Clock Management: PLL
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Lattice Semiconductor
1. Unlocked
2. Key Locked – Presenting the key through the programming interface allows the device to be unlocked.
3. Permanently Locked – The device is permanently locked.
To further complement the security of the device a One Time Programmable (OTP) mode is available. Once the
device is set in this mode it is not possible to erase or re-program the Flash portion of the device.
Serial TAG Memory
LatticeXP2 devices offer 0.6 to 3.3kbits of Flash memory in the form of Serial TAG memory. The TAG memory is an
area of the on-chip Flash that can be used for non-volatile storage including electronic ID codes, version codes,
date stamps, asset IDs and calibration settings. A block diagram of the TAG memory is shown in Figure 2-34. The
TAG memory is accessed in the same way as external SPI Flash and it can be read or programmed either through
JTAG, an external Slave SPI Port, or directly from FPGA logic. To read the TAG memory, a start address is speci-
fied and the entire TAG memory contents are read sequentially in a first-in-first-out manner. The TAG memory is
independent of the Flash used for device configuration and given its use for general-purpose storage functions is
always accessible regardless of the device security settings. For more information, see TN1137,
ory Usage Guide
Figure 2-34. Serial TAG Memory Diagram
Live Update Technology
Many applications require field updates of the FPGA. LatticeXP2 devices provide three features that enable this
configuration to be done in a secure and failsafe manner while minimizing impact on system operation.
1. Decryption Support
2. TransFR (Transparent Field Reconfiguration)
3. Dual Boot Image Support
LatticeXP2 devices provide on-chip, non-volatile key storage to support decryption of a 128-bit AES encrypted
bitstream, securing designs and deterring design piracy.
TransFR I/O (TFR) is a unique Lattice technology that allows users to update their logic in the field without
interrupting system operation using a single ispVM command. TransFR I/O allows I/O states to be frozen dur-
ing device configuration. This allows the device to be field updated with a minimum of system disruption and
downtime. For more information please see TN1087,
Using TransFR
Dual boot images are supported for applications requiring reliable remote updates of configuration data for the
system FPGA. After the system is running with a basic configuration, a new boot image can be downloaded
remotely and stored in a separate location in the configuration storage device. Any time after the update the
LatticeXP2 can be re-booted from this new configuration file. If there is a problem such as corrupt data during
download or incorrect version number with this new boot image, the LatticeXP2 device can revert back to the
External Slave
SPI Port
JTAG
FPGA Logic
and TN1141,
Technology.
Sequential
Address
Counter
LatticeXP2 sysCONFIG Usage
TDI
Flash Memory Array
Data Shift Register
2-39
Flash
Minimizing System Interruption During Configuration
Guide.
LatticeXP2 Family Data Sheet
TDO
External Slave
SPI Port
JTAG
FPGA Logic
LatticeXP2 Mem-
Architecture