SC28L92A1A NXP Semiconductors, SC28L92A1A Datasheet - Page 27

• Manufacturer Part Number: SC28L92A1A
• Description: UART, DUAL, 3.3V OR 5V, SMD, 28L92
• Manufacturer: NXP Semiconductors

Specifications of SC28L92A1A

• No. Of Channels: 2
• Supply Voltage Range: 2.97V To 3.63V, 4.5V To 5.5V
• Operating Temperature Range: -40°C To +85°C
• Digital Ic Case Style: PLCC
• No. Of Pins: 44
• Svhc: No SVHC (18-Jun-2010)
• Operating: RoHS Compliant
• Data Rate: 230.4Kilobaud
• Uart Features: Programmable Channel Mode, Line Break Detection & Generation
• Rohs Compliant: Yes

NXP Semiconductors
SC28L92_7
Product data sheet
Table 24.
Table 25.
[1]
Table 26.
[1]
Bit
3
2
1
0
RxINT[2:1] (bits MR0[6] and MR1[6])
FIFOSIZE = 0 (8 bytes)
00
01
10
11
FIFOSIZE = 1 (16 bytes)
00
01
10
11
TxINT[1:0] (bits MR0[5:4])
FIFOSIZE = 0 (8 bytes)
00
01
10
11
FIFOSIZE = 1 (16 bytes)
00
01
10
11
Interrupt fill level must be set when the transmit and receive FIFOs are empty, otherwise the new level takes
effect only after a read or a write to the FIFO.
Interrupt fill level must be set when the transmit and receive FIFOs are empty, otherwise the new level takes
effect only after a read or a write to the FIFO.
Symbol
FIFOSIZE
BAUDRATE
EXTENDED I
TEST2
BAUDRATE
EXTENDED II
MR0A - Mode Register 0 channel A (address 0x0) bit description
Receiver FIFO interrupt fill level
Transmitter FIFO interrupt fill level
Rev. 07 — 19 December 2007
3.3 V/5.0 V Dual Universal Asynchronous Receiver/Transmitter
Description
FIFO size for channel A and channel B. Selects the FIFO depth at
8-byte or 16-byte.
Bits MR0[2:0] are used to select one of the six baud rate groups. See
Table 35
Other combinations of MR0[2:0] should not be used.
0 = 8 bytes
1 = 16 bytes
000 = Normal mode
001 = Extended mode I
100 = Extended mode II
for the group organization.
[1]
[1]
Interrupt condition
1 or more bytes in FIFO (RxRDY)
3 or more bytes in FIFO
6 or more bytes in FIFO
8 bytes in FIFO (RxFULL)
1 or more bytes in FIFO (RxRDY)
8 or more bytes in FIFO
12 or more bytes in FIFO
16 bytes in FIFO (RxFULL)
Interrupt condition
8 bytes empty (TxEMPTY)
4 or more bytes empty
6 or more bytes empty
1 or more bytes empty (TxRDY)
16 bytes empty (TxEMPTY)
8 or more bytes empty
12 or more bytes empty
1 or more bytes empty (TxRDY)
SC28L92
© NXP B.V. 2007. All rights reserved.
…continued
27 of 73