C500CP131 Omron, C500CP131 Datasheet - Page 124

• Manufacturer Part Number: C500CP131
• Description: C-SERIES SPECIAL I/O UNIT
• Manufacturer: Omron

Specifications of C500CP131

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Programming in the Mnemonic Display Mode
Deleting an Instruction
Reading Programs
Procedure
118
Reading a specified
program address
Finding basic
instructions
Finding instructions from
a specified function
code.
Finding instructions with
specific operands
Finding operands
Finding an I/O name
Finding an I/O comment
Method
1, 2, 3...
F3 Address CR
Press any key from F6 to F9 Operand CR
or
Shift+F5 (or F6, F8) Operand CR
Instruction executed every cycle:
F10 Function_code CR
Differentiate up/down instruction or immediate refresh
instruction:
F10 Function_code Shift+F3 (or F4, F10) CR
F4 Mnemonic _ Operand CR
F5 Operand CR
F5 I/O name CR
Shift+F1 I/O comment CR
The following operations can be used to read a program from the work disk and
display it in mnemonic form.
First press the F1 Key in the Write or Insert mode to select the Read mode and
then proceed as shown in the following table to display 20 lines of the program
from the designated instruction.
After specifying the read or find operation as described in the previous table, fol-
low the procedure below.
or
1. Press the F1 or F2 Key in the Read or Insert mode to select the Write mode.
2. Move the cursor to the instruction to be deleted and press the SPACE Key.
The instruction at the cursor position will be deleted.
Press the BACKSPACE Key to delete the instruction above the cursor posi-
tion.
Key sequence
It is not necessary to input leading
zeros. Input address 000000 as 0.
Specify operands on the screen
with the Up, Down, PgDn, and
PgUp Keys or input them
numerically.
Leading zeros are not required on
bit addresses.
Input leading zeros of the function
code.
While the FUN(???) prompt is
displayed, press the Enter Key or
the Ctrl+F Keys to display a table
of instructions. Select the required
instruction with the cursor and
press the Enter Key. The selected
instruction will be displayed at the
bottom of the screen.
Press the Enter Key to start the
search.
Enter the instruction and
operands with the alphanumeric
keys. Press the Space Key to
separate instructions from
operands and operands from
operands.
Input leading zeros of the function
code.
Use the ? Key as a wildcard
character to omit operands.
Specify operands as a bit
addresses, word addresses, or
I/O names. Input leading zeros of
the bit address.
Only one operand can be
specified.
Finds the I/O name starting with
the specified string.
Finds the I/O comment starting
with the specified string. The I/O
comment will not be displayed.
Description
Section 3-10