C500CP131 Omron, C500CP131 Datasheet - Page 93

• Manufacturer Part Number: C500CP131
• Description: C-SERIES SPECIAL I/O UNIT
• Manufacturer: Omron

Specifications of C500CP131

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Programming in Ladder Form
Editing in Write Mode
Editing Examples
Changing a Bit Address
Clearing data from input
area
Creating a Blank
Column
Creating a Blank Line
Deleting a Blank Column Move cursor Del
Deleting a Blank Line
Deleting all 22 program
lines of the ladder
diagram
Deleting the symbol at
cursor position
Deleting the symbol to
left of cursor
Inserting a symbol
Reversing normally
open and normally
closed conditions
Operation
Home (or re-input the symbol)
Move cursor Ins
Move cursor PgUp
Move cursor PgDn
Shift+Home
Deleting a condition, instruction,
or horizontal connection:
Move cursor Space Key
Deleting a condition, instruction,
or horizontal connection:
Move cursor Backspace
Deleting a vertical connection:
Shift+F2 Backspace
Move cursor Ins Insert symbol
Bit_address CR
Move cursor / CR
In this example, the bit address is changed from 000100 to 000300 in the follow-
ing program.
Press Enter, 300, and Enter.
Key sequence
Cursor
I0003
I0001
00
00
–––
A blank column is created at the cursor position.
If an instruction block contains more than one line, a
blank column is created at the cursor position in every
line of the instruction block.
A blank line is created at the cursor position.
No blank line can be created if the program already
contains 22 instruction lines.
The blank column at the cursor position is deleted.
If an instruction block contains more than one line, the
blank column is deleted at the cursor position in every
line of the instruction block at the cursor position. The
delete operation will be cancelled unless a blank column
exists at the cursor position in every line of the
instruction block.
The blank line at the cursor position is deleted.
The deleted operation will be cancelled if the line at the
cursor position contains ladder elements, including any
instructions.
–––
The cursor position becomes blank.
Edit as required to complete the program.
Vertical connections cannot be deleted by this method.
The symbol to the left of the cursor will be deleted.
Edit as required to complete the program.
To delete a righthand instruction, place the cursor on the
far left of the same instruction line and press the
Backspace Key.
The cursor position goes blank and a symbol is entered.
The condition at the cursor will change from normally
open to normally closed or from normally closed to
normally open.
Comments
Q0005
Q0005
00
00
Section 3-5
87