CRT1-OD16TAH Omron, CRT1-OD16TAH Datasheet - Page 127

• Manufacturer Part Number: CRT1-OD16TAH
• Description: 16 Out NPN 3 Tier
• Manufacturer: Omron

Specifications of CRT1-OD16TAH

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Connecting External I/O for Slave Units
■ Preparing External Device Cables
■ Inserting Cable Wires into the Cable Connector
OMRON Connectors
Using Tyco Electronics or Sumitomo 3M Connectors
The sensor and other external device cables for connector output with transis-
tors are normally either semi-stripped or stripped, as shown in the following
diagram.
When the cables are prepared this way, a cable connector cannot be
attached, so first cut the end and remove the cable sheath as shown in the fol-
lowing diagram. (Do not strip the sheaths of the core wires.)
Using OMRON Connectors
Align the cable with the strip gauge on the side of the connector. Remove 7 to
8 mm of the wiring sheath, and twist the exposed wires several times.
Insert the cable wires of the external device into the cable connector, and con-
nect each wire so that the terminal number on the connector cover matches
the wire color as shown in the following table.
Semi-stripped cable
37104-2165-000FL
37104-2206-000FL
XN2A-1430
1
2
37104-2124-000FL
Terminal
number
• For Digital I/O Slave Unit
Model
Model
7 to 8 mm
20 mm min.
Brown (red)
---
ID16S(H), CRT1-MD16S(H), CRT1-
3-wire sensor
(without self-
CRT1B-ID02S, CRT1B-ID02SP,
diagnostic
Using CRT1-VID08S, CRT1-
ID32S(H), CRT1-MD32S(H),
output)
CRT1B-ID04SP
Stripped cable
Green
Blue
Gray
Spring clamp type AWG28 (0.08 mm
Housing color
Specification
---
---
2-wire sensor
(without self-
diagnostic
output)
AWG22 (0.3 mm
sheath outer diameter: 1.0 to 1.2 mm
AWG22 (0.3 mm
sheath outer diameter: 1.2 to 1.6 mm
AWG22 (0.3 mm
sheath outer diameter: 1.6 to 2.0 mm
sheath outer diameter: 1.5 mm max.
Brown (red)
---
3-wire sensor
(without self-
Applicable wire range
ID16S(H)-1, CRT1-MD16S(H)-1,
Using CRT1-VID08S-1, CRT1-
MD32S(H)-1, CRT1B-ID02S-1,
diagnostic
Applicable wire range
CRT1B-ID02SP-1, CRT1B-
output)
CRT1-ID32S(H)-1, CRT1-
2
2
2
) to AWG20 (0.5 mm
) to AWG20 (0.5 mm
) to AWG20 (0.5 mm
2
ID04SLP-1
) to AWG20 (0.5 mm
Brown (white)
---
2-wire sensor
Section 3-6
(without self-
diagnostic
output)
2
2
2
),
),
),
103
2
),