CRT1-OD16TAH Omron, CRT1-OD16TAH Datasheet - Page 566

• Manufacturer Part Number: CRT1-OD16TAH
• Description: 16 Out NPN 3 Tier
• Manufacturer: Omron

Specifications of CRT1-OD16TAH

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Temperature Input Unit Functions
Offset Compensation
Setting Using CX-Integrator
542
1,2,3...
Note
Note The offset value can be set even when using default scaling.
Lower limit: 8000 hex (−32768)
Upper limit: 7FFE hex (32766)
To scale the temperature input values to the scale required by the user, use
the CX-Integrator to set the conversion values (−28,000 to 28,000) for two
points in the scale (the 100% value and 0% value).
1. The default values are 0 and 28,000.
2. Reverse scaling, where the 0% scaling value is higher than the 100% scal-
The scaling function is equipped with offset compensation, which can com-
pensate for any error that occurs during scaling. The offset amount is added
to the scaled line as shown in the following diagram. The offset value can be
input between −28,000 to 28,000. Make sure that underflow or overflow does
not occur. The High Limit is 7FFE hex and the Low Limit is 8000 hex. (The
High Limit is 7FFFFFFE Hex and the Low Limit is 80000000 Hex for 1/100
Display Mode.)
1. Turn ON the power supply to the Temperature Input Unit.
2. Double-click the icon of the Temperature Input Unit to be set in the Network
3. Click the tab for the input where scaling is to be performed, and select the
Value for 100% set by user
(Scaling point 2)
Value for 0% set by user
(Scaling point 1)
ing value, is also supported.
Configuration Window or right-click the icon and select Parameter - Edit.
The Configuration Window will be displayed.
Scaling Check Box in the Function Choice Area.
100% scaling value
0% scaling
Scaling value
0%
Conversion
0%
Offset value
(–28,000 to 28,000)
100%
100%
Input signal range
Section 11-6
Scaled line
Input signal range