CRT1-OD16TAH Omron, CRT1-OD16TAH Datasheet - Page 76

• Manufacturer Part Number: CRT1-OD16TAH
• Description: 16 Out NPN 3 Tier
• Manufacturer: Omron

Specifications of CRT1-OD16TAH

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Installing Slave Units
Horizontal Mounting
Mounting Procedure
Mounting Dimensions
Vertical Mounting to a Wall
52
2. Mount the Slave Unit to the Mounting Bracket. The Mounting Bracket is the
Use a Mounting Bracket to horizontally mount (side mount) a Slave Unit to a
panel or a wall.
Example: Mounting a CRT1-V@D32ML Slave Unit with MIL Connectors
1. Attach the Mounting Bracket to the panel surface (or wall) with two Phillips
2. Mount the Slave Unit to the Mounting Bracket. The Mounting Bracket is the
• Units with e-CON Connectors (CRT1-V@D08S(-1)/CRT1-VAD04S/CRT1-
same shape as a DIN Track, so use the same method as when mounting
to a DIN Track.
screws, as shown in the following diagram. For mounting hole dimensions,
refer to Dimensions above.
same shape as a DIN Track, so use the same method as when mounting
to a DIN Track.
VDA02S)
Panel surface (wall)
Horizontal (side)
mounting to panel
surface (or wall)
SRT2-ATT02
Mounting Bracket
Section 3-1