LS-X2280-BASE-PC-N Lattice, LS-X2280-BASE-PC-N Datasheet - Page 2

• Manufacturer Part Number: LS-X2280-BASE-PC-N
• Description: MCU, MPU & DSP Development Tools ispLEVER Base MachXO -2280 Std Dev Kit
• Manufacturer: Lattice

Specifications of LS-X2280-BASE-PC-N

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

MachXO Standard Evaluation Board
Lattice Semiconductor
Revisions 001 & 002 User’s Guide
Introduction
The MachXO Standard Evaluation board provides a convenient platform to evaluate electrical characteristics of the
MachXO device, and to evaluate, test and de-bug custom logic designs. The board features a MachXO device in a
256-ball fpBGA package. The MachXO I/Os are connected to a rich variety of interfaces, including an 8-bit input
switch, LEDs, PCB test points, 0.10” general purpose headers and optional high-speed SMA connectors. The
board includes selectable power for mixed core I/O voltage operation. A 33MHz oscillator, as well as an ispClock™
PLL synthesis device are also included on the board.
Features
• MachXO in 256-ball fine pitch Ball Grid Array package (MachXO640 or MachXO2280)
• Single printed circuit board solution
• Eight LEDs for visual feedback
• 8-bit input switch
• General purpose push-button
• 1149.1 JTAG programming/boundary-scan interface
• Built-in power supply operating with an DC input between 5V and 20V
• Selectable CORE voltage for the MachXO
• Selectable voltages for a portion of the I/O banks
• Built-in adjustable oscillator for reference clocking source
• Lattice ispClock5610 multiple output PLL
• SMA connector landing pads (SMA connectors not populated) to MachXO clock input/general purpose I/O pins
• RJ-45 connector (not populated)
• LCD/GPIO footprint
• 100mil center-center test point grid
• Impedance controlled Mictor (not populated)
General Description
The heart of the board is the MachXO programmable logic device in a 256-ball fpBGA package. The board is
designed to cover a broad range of core and I/O voltage requirements. The MachXO “C” grade devices require a
core voltage supply between 1.5V to 3.3V and an auxiliary 3.3V supply. The “E” grade devices require a core volt-
age supply at 1.2V and an auxiliary I/O supply at 3.3V. The MachXO Standard Evaluation Board provides three
supply voltages, all sourced from a 5V to 20V external source (or sourced individually via the banana jack inputs).
The board provides fixed 1.2V and 3.3V power rails and a single adjustable voltage that ranges from 1.2V to 3.3V.
It is possible to use external power supplies to override the fixed output levels if desired. The voltage supplied to the
MachXO core is selectable. The core voltage is changed by moving a single current sense resistor.
Once a correct set of supply voltages has been applied to the MachXO, the device can be programmed. The
MachXO can be programmed and verified with a Lattice JTAG download cable, which should be connected to the
®
1x10 SIP header on the board (1149.1 JTAG interface). The ispVM
System software controls the programming
and verification process. The ispVM System software is available for download from www.latticesemi.com/software.
2