CY8C3665AXI-010 Cypress Semiconductor Corp, CY8C3665AXI-010 Datasheet - Page 54

• Manufacturer Part Number: CY8C3665AXI-010
• Description: PSOC3
• Manufacturer: Cypress Semiconductor Corp
• Series: PSOC™ 3 CY8C36xxr

Specifications of CY8C3665AXI-010

• Package / Case: *
• Voltage - Supply (vcc/vdd): 1.71 V ~ 5.5 V
• Operating Temperature: -40°C ~ 85°C
• Speed: 67MHz
• Number Of I /o: 62
• Eeprom Size: 1K x 8
• Core Processor: 8051
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Program Memory Size: 32KB (32K x 8)
• Data Converters: A/D 2x12b, D/A 4x8b
• Oscillator Type: Internal
• Peripherals: CapSense, DMA, POR, PWM, WDT
• Connectivity: EBI/EMI, I²C, LIN, SPI, UART/USART
• Core Size: 8-Bit
• Operating Temperature (min): -40C
• Operating Temperature (max): 85C
• Technology: CMOS
• Processing Unit: Microcontroller
• Operating Supply Voltage (min): 1.8V
• Operating Supply Voltage (typ): 2.5/3.3/5V
• Operating Supply Voltage (max): 5.5V
• Package Type: TQFP
• Screening Level: Industrial
• Pin Count: 100
• Mounting: Surface Mount
• Rad Hardened: No
• Processor Series: CY8C36
• Core: 8051
• Data Bus Width: 32 bit
• Data Ram Size: 8 KB
• Interface Type: I2C, SPI, UART, USB
• Maximum Clock Frequency: 67 MHz
• Number Of Programmable I/os: 28 to 72
• Number Of Timers: 4
• Operating Supply Voltage: 0.5 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Controller Family/series: (8051) PSOC 3
• No. Of I/o's: 62
• Eeprom Memory Size: 1KB
• Ram Memory Size: 4KB
• Cpu Speed: 67MHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

8.9.1 Current DAC
The current DAC (IDAC) can be configured for the ranges 0 to
32 µA, 0 to 256 µA, and 0 to 2.048 mA. The IDAC can be
configured to source or sink current.
8.9.2 Voltage DAC
For the voltage DAC (VDAC), the current DAC output is routed
through resistors. The two ranges available for the VDAC are 0
to 1.024 V and 0 to 4.096 V. In voltage mode any load connected
to the output of a DAC should be purely capacitive (the output of
the VDAC is not buffered).
8.10 Up/Down Mixer
In continuous time mode, the SC/CT block components are used
to build an up or down mixer. Any mixing application contains an
input signal frequency and a local oscillator frequency. The
polarity of the clock, Fclk, switches the amplifier between
inverting or noninverting gain. The output is the product of the
input and the switching function from the local oscillator, with
frequency components at the local oscillator plus and minus the
signal frequency (Fclk + Fin and Fclk – Fin) and reduced-level
frequency components at odd integer multiples of the local
oscillator frequency. The local oscillator frequency is provided by
the selected clock source for the mixer.
Continuous time up and down mixing works for applications with
input signals and local oscillator frequencies up to 1 MHz.
Document Number: 001-53413 Rev. *J
Reference
Source
PRELIMINARY
Figure 8-12. DAC Block Diagram
Scaler
8.11 Sample and Hold
The main application for a sample and hold, is to hold a value
stable while an ADC is performing a conversion. Some
applications require multiple signals to be sampled
simultaneously, such as for power calculations (V and I).
V
V
sc_clk
Vin
Vref
n
i
ref
PSoC
I
R
( Φ 1 and Φ 2 are opposite phases of a clock)
I
1x , 8x , 64x
1x , 8x , 64x
source
mix
sink
Figure 8-14. Sample and Hold Topology
0 20 k or 40 k
®
Range
Φ
Φ
Range
Φ
Figure 8-13. Mixer Configuration
Φ
2
3: CY8C36 Family Datasheet
2
1
1
3R
R
0
1
C
C
1
3
Vout
C2 = 1.7 pF
C1 = 850 fF
Φ
Φ
Φ
Φ
R
2
1
2
1
mix
sc_clk
0 20 k or 40 k
C
C
Iout
2
4
Φ
Φ
Φ
Φ
1
2
1
2
V
V
ref
Page 54 of 111
ref
Vout
V
out
[+] Feedback
[+] Feedback