CYII4SC014KAA-GTC Cypress Semiconductor Corp, CYII4SC014KAA-GTC Datasheet - Page 4

• Manufacturer Part Number: CYII4SC014KAA-GTC
• Description: IC SENSOR IMAGE COLOR 49-PGA
• Manufacturer: Cypress Semiconductor Corp
• Type: CMOS Imagingr

Specifications of CYII4SC014KAA-GTC

• Package / Case: 49-PGA
• Pixel Size: 8µm x 8µm
• Active Pixel Array: 3048H x 4560V
• Frames Per Second: 3
• Voltage - Supply: 3.3V
• Operating Supply Voltage: 3.6 V
• Maximum Operating Temperature: + 50 C
• Minimum Operating Temperature: 0 C
• Image Size: 4560 H x 3048 V
• Color Sensing: Color
• Package: 49PGA
• Operating Temperature: 0 to 50 °C
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Contains lead / RoHS non-compliant
• Other names: IBIS4-14000-C; IBIS4-14000-C

CYII4SC014KAA-GTC
CYII4SM014KAA-GEC
Output Amplifier Crossbar Switch (multiplexer)
Figure 5. Output Amplifier Crossbar Switch
A crossbar switch is available that routes the green pixels always
CLK_YR
to the same output (this is useful for a color device to avoid gain
and offset differences between green pixels). The switch can be
controlled automatically (with a toggle on every CLK_Y rising
edge) or manually (through the SPI register).
Manual
SYNC_YR
Q
A pulse on SYNC_Y resets the crossbar switch. The initial state
after reset of the switchboard is read from the SPI control
register. When the automatic toggling of the switchboard is
enabled, it toggles on every rising edge of the CLK_Y clock.
Separate pins are used for the SYNC_Y and CLK_Y signals on
the crossbar logic these pins can be connected to the SYNC_YL
and CLK_YL pins of the shift register that is used for readout as
shown in
Figure
5.
Power
Power
Power
Power
Document #: 38-05709 Rev. *D
Page 4 of 27
[+] Feedback