E39-C1 Omron, E39-C1 Datasheet - Page 11

• Manufacturer Part Number: E39-C1
• Description: E3MC CABLE CONNECTOR 2M
• Manufacturer: Omron
• Type: Threaded Cylindrical Photoelectric Sensorsr

Specifications of E39-C1

• Features: Axial and Radial types
• Sensing Distance: 7 mm
• Amplifier Type: Built In Amplifier
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

E3MC
4-output Models (E3MC-MA@@/E3MC-MX@@/E3MC-MY@@)
1. Channel Selection
Set the Mode Selector to the TEACH mode and then select the
channel using the SELECT button.
2. Color Registration
3. Threshold Adjustment (If Required)
Press the SELECT button in ADJ mode with or without the sens-
ing object located at the detection point. The channel selected in
the TEACH mode or RUN mode will become the channel for the
ADJ mode.
4. Operation
The detection operation is performed in RUN mode.
ON/OFF status of each channel is displayed on the
channel indicators. Doubly displayed channels (op-
eration indicator and channel indicator) can be
checked and selected by pressing the TEACH but-
ton and selected by pressing the SELECT button.
Locate the registered object at the detection
point and press the TEACH button.
Sensing object
Sensor
Registered object
For checking which channel is
indicated with the operation
indicator.
Sensor
Press the
TEACH button.
For indicating detection level and threshold value for other channels
Press the SELECT button.
Displays the channel whose detection
level is currently indicated in the
channel indicator for three seconds.
No Good
OK
All the red threshold indicators
will flash if registration has not
been completed.
Refer to Technical Guide on
page 12.
Detection Level and Tolerance
As the detected color becomes closer to the registered color, the
number of lit detection level indicators increase. The control out-
put of the E3MC will be ON if the detection level exceeds the
threshold level and OFF if the detection level does not exceed the
threshold level provided that the E3MC is in conformity output
mode.
Set the threshold to a higher level for highly-precise color discrim-
ination and to a lower level to ignore minor tint differences or dirt
retention.
Operation
indicator: ON
Control output:
ON
Detection level
Threshold
value
Tolerance
Displays the selected channel in the
channel indicator for three seconds and
indicates detection level and threshold
value of the selected channel.
The threshold is set to 4.
All the detection level
indicators are ON.
Operation
indicator: OFF
Control output:
OFF
Detection level
Threshold
value
E3MC
11