LAN9311-NZW Standard Microsystem (Smsc), LAN9311-NZW Datasheet - Page 236

• Manufacturer Part Number: LAN9311-NZW
• Description: Ethernet Switch 2-Port 10Mbps/100Mbps 128-Pin XVTQFP
• Manufacturer: Standard Microsystem (Smsc)

Specifications of LAN9311-NZW

• Package: 128XVTQFP
• Phy/transceiver Interface: MII
• Number Of Primary Switch Ports: 2
• Maximum Data Rate: 100 Mbps
• Internal Memory Buffer Size: 32 KB
• Vlan Support: Yes
• Power Supply Type: Analog
• Minimum Single Supply Voltage: 3 V
• Maximum Single Supply Voltage: 3.6 V
• Maximum Supply Current: 0.295 A
• Maximum Power Dissipation: 1070 mW

Revision 1.7 (06-29-10)
14.2.6.4
BITS
31:0
Switch CSR Data (CSR_DATA)
This field contains the value read from or written to the Switch Fabric CSR.
The Switch Fabric CSR is selected via the
bits of the
(SWITCH_CSR_CMD).
Upon a read, the value returned depends on the R/nW bit in the
Fabric CSR Interface Command Register
set, the data is from the switch fabric. If R/nW is cleared, the data is the
value that was last written into this register.
Switch Fabric CSR Interface Data Register (SWITCH_CSR_DATA)
This read/write register is used in conjunction with the
(SWITCH_CSR_CMD)
Section 14.5, "Switch Fabric Control and Status Registers," on page 309
indirectly accessible via this register.
Switch Fabric CSR Interface Command Register
Offset:
to perform read and write operations with the Switch Fabric CSR’s. Refer to
1ACh
DESCRIPTION
DATASHEET
(SWITCH_CSR_CMD). If R/nW is
CSR Address (CSR_ADDR[15:0])
236
Two Port 10/100 Managed Ethernet Switch with 16-Bit Non-PCI CPU Interface
Size:
Switch Fabric CSR Interface Command Register
Switch
32 bits
for details on the registers
TYPE
R/W
SMSC LAN9311/LAN9311i
00000000h
DEFAULT
Datasheet