LAN9311-NZW Standard Microsystem (Smsc), LAN9311-NZW Datasheet - Page 282

• Manufacturer Part Number: LAN9311-NZW
• Description: Ethernet Switch 2-Port 10Mbps/100Mbps 128-Pin XVTQFP
• Manufacturer: Standard Microsystem (Smsc)

Specifications of LAN9311-NZW

• Package: 128XVTQFP
• Phy/transceiver Interface: MII
• Number Of Primary Switch Ports: 2
• Maximum Data Rate: 100 Mbps
• Internal Memory Buffer Size: 32 KB
• Vlan Support: Yes
• Power Supply Type: Analog
• Minimum Single Supply Voltage: 3 V
• Maximum Single Supply Voltage: 3.6 V
• Maximum Supply Current: 0.295 A
• Maximum Power Dissipation: 1070 mW

Revision 1.7 (06-29-10)
BITS
0
Flow Control Busy (FCBSY)
In full-duplex mode, this bit should read logical 0 before writing to the Host
MAC Flow Control (HMAC_FLOW) register. To initiate a PAUSE control
frame, the bit must be set. During a transfer of control frame, this bit
continues to be set, signifying that a frame transmission is in progress. After
the PAUSE control frame’s transmission is complete, the Host MAC resets
the bit to 0.
Backpressure Enable (BkPresEn)
In half-duplex mode, this signal functions as a backpressure enable and is
set high whenever backpressure is transmitted.
Notes:
When writing this register, the FCBSY bit must always be zero.
Applications must always write a zero to this bit
DESCRIPTION
DATASHEET
282
Two Port 10/100 Managed Ethernet Switch with 16-Bit Non-PCI CPU Interface
TYPE
R/W
SMSC LAN9311/LAN9311i
DEFAULT
Datasheet
0b