LAN9311-NZW Standard Microsystem (Smsc), LAN9311-NZW Datasheet - Page 398

• Manufacturer Part Number: LAN9311-NZW
• Description: Ethernet Switch 2-Port 10Mbps/100Mbps 128-Pin XVTQFP
• Manufacturer: Standard Microsystem (Smsc)

Specifications of LAN9311-NZW

• Package: 128XVTQFP
• Phy/transceiver Interface: MII
• Number Of Primary Switch Ports: 2
• Maximum Data Rate: 100 Mbps
• Internal Memory Buffer Size: 32 KB
• Vlan Support: Yes
• Power Supply Type: Analog
• Minimum Single Supply Voltage: 3 V
• Maximum Single Supply Voltage: 3.6 V
• Maximum Supply Current: 0.295 A
• Maximum Power Dissipation: 1070 mW

Revision 1.7 (06-29-10)
14.5.3.28
31:16
BITS
15:0
RESERVED
Data
This is the data to be written to the ingress rate table registers as specified
in the
(SWE_INGRSS_RATE_CMD). Refer to
Table Registers," on page 396
Switch Engine Ingress Rate Write Data Register (SWE_INGRSS_RATE_WR_DATA)
This register is used to write the ingress rate table registers.
Switch Engine Ingress Rate Command Register
Register #:
184Dh
DESCRIPTION
for details on these registers.
DATASHEET
Section 14.5.3.26.1, "Ingress Rate
398
Two Port 10/100 Managed Ethernet Switch with 16-Bit Non-PCI CPU Interface
Size:
32 bits
TYPE
R/W
SMSC LAN9311/LAN9311i
RO
DEFAULT
0000h
Datasheet
-