SI5326C-C-GM Silicon Laboratories Inc, SI5326C-C-GM Datasheet - Page 60

• Manufacturer Part Number: SI5326C-C-GM
• Description: DSPLL 36-Pin QFN EP
• Manufacturer: Silicon Laboratories Inc
• Type: Jitter Attenuatorr

Specifications of SI5326C-C-GM

• Package: 36QFN EP
• Operating Temperature: -40 to 85 °C
• Pll: Yes
• Input: Clock
• Output: CML, CMOS, LVDS, LVPECL
• Number Of Circuits: 1
• Ratio - Input:output: 2:2
• Differential - Input:output: Yes/Yes
• Frequency - Max: 346MHz
• Divider/multiplier: Yes/Yes
• Voltage - Supply: 1.71 V ~ 3.63 V
• Mounting Type: Surface Mount
• Package / Case: 36-QFN
• Frequency-max: 346MHz
• Operating Temperature (max): 85C
• Operating Temperature (min): -40C
• Package Type: QFN EP
• Mounting: Surface Mount
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 336-1746; 336-1746-5; 336-1746

Si5326
60
Note: Internal register names are indicated by underlined italics, e.g., INT_PIN. See Section “5.Register Map”.
Pin #
18
19
20
Pin Name
DEC
LOL
INC
I/O
O
I
I
Signal Level
LVCMOS
LVCMOS
LVCMOS
PLL Loss of Lock Indicator.
This pin functions as the active high PLL loss of lock indicator if the
LOL_PIN register bit is set to 1.
0 = PLL locked
1 = PLL unlocked
If LOL_PIN = 0, this pin will tristate. Active polarity is controlled by
the LOL_POL bit. The PLL lock status will always be reflected in the
LOL_INT read only register bit.
Skew Decrement.
A pulse on this pin decreases the input to output device skew by
1/f
skew adjustment by this method.
Pin control is enabled by setting INCDEC_PIN = 1. If
INCDEC_PIN = 0, this pin is ignored and output skew is controlled
via the CLAT register.
If both INC and DEC are tied high, phase buildout is disabled and
the device maintains a fixed-phase relationship between the
selected input clock and the output clock during an input clock
switch.
See the Si53xx Family Reference Manual for more details.
This pin has a weak pull-down.
Skew Increment.
A pulse on this pin increases the input to output device skew by
1/f
skew adjustment by this method.
Pin control is enabled by setting INCDEC_PIN = 1. If
INCDEC_PIN = 0, this pin is ignored and output skew is controlled
via the CLAT register.
If both INC and DEC are tied high, phase buildout is disabled and
the device maintains a fixed-phase relationship between the
selected input clock and the output clock during an input clock
switch.
See the Si53xx Family Reference Manual for more details.
Note: INC does not increase skew if NI_HS = 4.
This pin has a weak pull-down.
OSC
OSC
(approximately 200 ps). There is no limit on the range of
(approximately 200 ps). There is no limit on the range of
Rev. 1.0
Description