MT48LC16M16A2P-7E IT:D Micron Technology Inc, MT48LC16M16A2P-7E IT:D Datasheet - Page 48

• Manufacturer Part Number: MT48LC16M16A2P-7E IT:D
• Description: DRAM Chip SDRAM 256M-Bit 16Mx16 3.3V 54-Pin TSOP-II Tray
• Manufacturer: Micron Technology Inc
• Type: SDRAMr

Specifications of MT48LC16M16A2P-7E IT:D

• Density: 256 Mb
• Maximum Clock Rate: 143 MHz
• Package: 54TSOP-II
• Address Bus Width: 15 Bit
• Operating Supply Voltage: 3.3 V
• Maximum Random Access Time: 5.4 ns
• Operating Temperature: -40 to 85 °C
• Format - Memory: RAM
• Memory Type: SDRAM
• Memory Size: 256M (16Mx16)
• Speed: 133MHz
• Interface: Parallel
• Voltage - Supply: 3 V ~ 3.6 V
• Package / Case: 54-TSOP II
• Organization: 16Mx16
• Address Bus: 15b
• Access Time (max): 5.4ns
• Operating Supply Voltage (typ): 3.3V
• Package Type: TSOP-II
• Operating Temp Range: -40C to 85C
• Operating Supply Voltage (max): 3.6V
• Operating Supply Voltage (min): 3V
• Supply Current: 135mA
• Pin Count: 54
• Mounting: Surface Mount
• Operating Temperature Classification: Industrial
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Burst Length
Burst Type
PDF: 09005aef8091e6d1
256Mb_sdr.pdf - Rev. N 1/10 EN
Read and write accesses to the device are burst oriented, and the burst length (BL) is
programmable. The burst length determines the maximum number of column loca-
tions that can be accessed for a given READ or WRITE command. Burst lengths of 1, 2,
4, 8, or continuous locations are available for both the sequential and the interleaved
burst types, and a continuous page burst is available for the sequential type. The contin-
uous page burst is used in conjunction with the BURST TERMINATE command to
generate arbitrary burst lengths.
Reserved states should not be used, as unknown operation or incompatibility with fu-
ture versions may result.
When a READ or WRITE command is issued, a block of columns equal to the burst
length is effectively selected. All accesses for that burst take place within this block,
meaning that the burst wraps within the block when a boundary is reached. The block
is uniquely selected by A[8:1] when BL = 2, A[8:2] when BL = 4, and A[8:3] when BL = 8.
The remaining (least significant) address bit(s) is (are) used to select the starting loca-
tion within the block. Continuous page bursts wrap within the page when the boundary
is reached.
Accesses within a given burst can be programmed to be either sequential or interleaved;
this is referred to as the burst type and is selected via bit M3.
The ordering of accesses within a burst is determined by the burst length, the burst
type, and the starting column address.
48
Micron Technology, Inc. reserves the right to change products or specifications without notice.
256Mb: x4, x8, x16 SDRAM
© 1999 Micron Technology, Inc. All rights reserved.
Mode Register