USB3320C-EZK-TR Standard Microsystems (SMSC), USB3320C-EZK-TR Datasheet - Page 11

• Manufacturer Part Number: USB3320C-EZK-TR
• Manufacturer: Standard Microsystems (SMSC)

Specifications of USB3320C-EZK-TR

• Number Of Transceivers: 1
• Esd Protection: YeskV
• Operating Supply Voltage (typ): Not RequiredV
• Operating Temperature Classification: Industrial
• Operating Supply Voltage (max): Not RequiredV
• Operating Supply Voltage (min): Not RequiredV
• Pin Count: 32
• Mounting: Surface Mount
• Operating Temperature (max): 85C
• Operating Temperature (min): -40C
• Lead Free Status / RoHS Status: Compliant

Highly Integrated Full Featured Hi-Speed USB 2.0 ULPI Transceiver
Datasheet
SMSC USB3320
PIN
10
12
13
14
15
16
11
2
3
4
5
6
7
8
9
REFSEL[0]
REFSEL[1]
REFSEL[2]
DATA[0]
DATA[1]
DATA[2]
DATA[3]
DATA[4]
DATA[5]
DATA[6]
DATA[7]
SPK_L
SPK_R
NAME
NXT
N/C
Table 2.1 USB3320 Pin Description (continued)
DIRECTION/
Output,
Analog
Analog
DATASHEET
CMOS
CMOS
CMOS
CMOS
CMOS
CMOS
CMOS
CMOS
CMOS
CMOS
CMOS
CMOS
TYPE
Input,
Input,
Input,
I/O,
I/O,
I/O,
I/O,
I/O,
I/O,
I/O,
I/O,
I/O,
I/O,
11
ACTIVE
LEVEL
High
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
The transceiver asserts NXT to throttle
the data. When the Link is sending data
to the transceiver, NXT indicates when
the current byte has been accepted by
the transceiver. The Link places the next
byte on the data bus in the following
clock cycle.
ULPI bi-directional data bus.
ULPI bi-directional data bus.
ULPI bi-directional data bus.
ULPI bi-directional data bus.
ULPI bi-directional data bus.
This signal, along with REFSEL[1] and
REFSEL[2] selects one of the available
reference frequencies as defined in
Table
Note: This signal must be tied to VDDIO
when in ULPI 60MHz REFCLK IN mode.
ULPI bi-directional data bus.
ULPI bi-directional data bus.
This signal, along with REFSEL[0] and
REFSEL[2] selects one of the available
reference frequencies as defined in
Table
Note: This signal must be tied to VDDIO
when in ULPI 60MHz REFCLK IN mode.
This pin must not be connected.
ULPI bi-directional data bus.
This signal, along with REFSEL[0] and
REFSEL[1] selects one of the available
reference frequencies as defined in
Table
Note: This signal must be tied to VDDIO
when in ULPI 60MHz REFCLK IN mode.
USB switch in/out for DM signals
USB switch in/out for DP signals
5.10.
5.10.
5.10.
DESCRIPTION
Revision 1.0 (07-14-09)