TLE4905LE6433XA Infineon Technologies, TLE4905LE6433XA Datasheet - Page 2

• Manufacturer Part Number: TLE4905LE6433XA
• Description: Hall Effect Sensor 100mA Unipolar 5V/9V/12V/15V/18V 3-Pin SSO T/R
• Manufacturer: Infineon Technologies

Specifications of TLE4905LE6433XA

• Magnetic Type: Unipolar
• Operating Supply Voltage (min): 3.8V
• Operating Supply Voltage (typ): 5/9/12/15/18V
• Operating Supply Voltage (max): 24V
• Output Current: 100mA
• Mag Sensor Operate Point (g): 180Gs
• Mag Sensor Release Point (g): 50Gs
• Mag Sensor Hysteresis(g): 60Gs
• Package Type: SSO
• Pin Count: 3
• Mounting: Through Hole
• Operating Temp Range: -40C to 150C
• Operating Temperature Classification: Automotive
• Package: 3SSO
• Operating Temperature: -40 to 150 °C
• Maximum Processing Temperature: 260 °C
• Operating Supply Voltage: 5|9|12|15|18 V
• Lead Free Status / RoHS Status: Compliant

Edition 2007-11
published by Infineon Technologies AG,
Am Campeon 1-12,
81726 München, Germany
©
Infineon Technologies AG 2007.
All Rights Reserved.
Attention please!
The information herein is given to describe certain components and shall not be considered as a guarantee of characteristics.
Terms of delivery and rights to technical change reserved.
We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits,
descriptions and charts stated herein.
Information
For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon
Technologies Office (www.infineon.com).
Warnings
Due to technical requirements components may contain dangerous substances. For information on the types in question
please contact your nearest Infineon Technologies Office.
Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of
Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support
device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended
to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is
reasonable to assume that the health of the user or other persons may be endangered.