S3086TT11 Applied Micro Circuits Corporation, S3086TT11 Datasheet

no-image

S3086TT11

Manufacturer Part Number
S3086TT11
Description
Manufacturer
Applied Micro Circuits Corporation
Datasheet

Specifications of S3086TT11

Package Type
TQFP
Pin Count
48
Mounting
Surface Mount
Lead Free Status / RoHS Status
Not Compliant
S3086
Continuous Rate Clock Recovery Unit
Features
• SiGe BiCMOS technology
• Complies with Telcordia and ITU-T specifica-
• On-chip high-frequency PLL with loop filter
• Programmable signal detect input active High
• Supports clock recovery from 30 Mbps to 2.7
• Capable of working at OC-48 with Forward or
• Selectable optional reference clock
• (19.44/155.52 MHz for SONET rates or user
• Loss-of-Lock Indication
• Low jitter serial interface
• +3.3 V single power supply
• Compact 48-pin TQFP/TEP Green/RoHS com-
• Typical power 825 mW (Serial Clock Enabled)
• Typical power 700 mW (Serial Clock Disabled)
Applications
• SONET/SDH/ATM/OC-3/OC-12/OC-48
• Fibre Channel
• Gigabit Ethernet/Fast Ethernet
• High Definition Television/Digital Television
• FireWire
• Fibre Distributed Data Interface (FDDI)
• Enterprise Systems Connection (ESCON)
• DS-3
tions for jitter tolerance, jitter transfer and jit-
ter generation
for clock recovery
or active Low (LVTTL and LVPECL Input)
Gbps with no gaps
Correction (FEC), OC-48, FireWire, HDTV, GE,
FC, OC-12, DTV, ESCON, OC-3, FDDI, FE, OC-1
and DS-3 rates
defined for non-SONET rates)
pliant package
(HDTV/DTV)
S3067
Description
The S3086 Continuous Rate Clock Recovery Unit
(CRU) is a variable rate clock recovery interface
device. This device is suitable for use in
applications such as SONET/SDH, Fibre Channel,
Fast Ethernet, HDTV, ESCON, Gigabit Ethernet,
and DS-3. The chip performs all necessary clock
recovery functions in conformance with the
Telcordia 253, IEEE 802.3, and SMPTE 292/184
transmission standards.
The S3086 CRU is capable of accepting a
scrambled 30 Mbps to 2.7 Gbps serial NRZ data
stream. It can derive a data clock from the data
stream and output the data stream retimed and
aligned with a companion serial bit clock. The
S3086 achieves its continuous rate capability in
a piece-wise continuous manner. This means
that the full operating range is provided
through the selection of one of twenty six (26)
overlapping bands which are uniquely
identified/programmed a by 5-bit band select
input bus. The S3086 is implemented using
AMCC’s proven Phase Lock Loop (PLL)
technology. Figure 1 shows a typical network
application for the S3086.
System Block Diagram with the S3086
S3086
TEIB
LD
S3160
S3160
S3086
TEIB
LD
An external reference oscillator should be used
for applications, including SONET/SDH, in which
continuous down-stream clocking is a
requirement under Loss-of-Signal (LOS)
conditions.
The S3086 utilizes an on-chip PLL which
consists of a phase detector, a loop filter, and a
Voltage Controlled Oscillator (VCO). The phase
detector compares the phase relationship
between the VCO output and the serial data
input. A loop filter converts the phase detector
output into a smooth DC voltage, and the DC
voltage is input to the VCO whose frequency is
varied by this voltage.
AMCC Suggested Interface Devices
S3055
S3057
S3059
S3067
S3067
PRODUC T BRIEF
OC-48/12/3 Multi-Rate Transceiver
OC-48 Transceiver
OC-48 Transceiver
OC-48/12/3 Multi-Rate Transceiver
S3086

Related parts for S3086TT11

S3086TT11 Summary of contents

Page 1

S3086 Continuous Rate Clock Recovery Unit Features Description • SiGe BiCMOS technology The S3086 Continuous Rate Clock Recovery Unit • Complies with Telcordia and ITU-T specifica- (CRU variable rate clock recovery interface tions for jitter tolerance, jitter transfer ...

Page 2

... OTHER CRITICAL APPLICATIONS. F 858 450 9885 AMCC is a registered trademark of Applied Micro Circuits Corporation. PowerPC and the PowerPC logo are registered trademarks of IBM Corporation. All other trademarks are the www.amcc.com property of their respective holders. Copyright © 2007 Applied Micro Circuits Corporation. All Rights Reserved. ...

Related keywords