IDT82V3280PFG IDT, Integrated Device Technology Inc, IDT82V3280PFG Datasheet - Page 115

• Manufacturer Part Number: IDT82V3280PFG
• Description: IC PLL WAN SE STRATUM 2 100-TQFP
• Manufacturer: IDT, Integrated Device Technology Inc
• Type: PLL Clock Generatorr

Specifications of IDT82V3280PFG

• Input: CMOS, LVDS, PECL, TTL
• Output: CMOS, LVDS, PECL, TTL
• Frequency - Max: 622.08MHz
• Voltage - Supply: 3 V ~ 3.6 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 100-TQFP, 100-VQFP
• Frequency-max: 622.08MHz
• Function: Wan PLL
• Operating Temperature (max): 85C
• Operating Temperature (min): -40C
• Package Type: TQFP
• Pin Count: 100
• Mounting: Surface Mount
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 82V3280PFG

IN13_IN14_STS - Input Clock 13 & 14 Status
Programming Information
IDT82V3280
Address: 49H
Type: Read
Default Value: X110X110
Bit
7
6
5
4
3
2
1
0
7
-
IN14_NO_ACTIVITY_ALARM
IN13_NO_ACTIVITY_ALARM
IN14_FREQ_HARD_ALARM
IN13_FREQ_HARD_ALARM
IN14_PH_LOCK_ALARM
IN13_PH_LOCK_ALARM
IN14_FREQ_H
ARD_ALARM
Name
6
-
-
IN14_NO_ACTI
VITY_ALARM
Reserved.
This bit indicates whether IN14 is in frequency hard alarm status.
0: No frequency hard alarm.
1: In frequency hard alarm status. (default)
This bit indicates whether IN14 is in no-activity alarm status.
0: No no-activity alarm.
1: In no-activity alarm status. (default)
This bit indicates whether IN14 is in phase lock alarm status.
0: No phase lock alarm. (default)
1: In phase lock alarm status.
If the PH_ALARM_TIMEOUT bit (b5, 09H) is ‘0’, this bit is cleared by writing ‘1’ to this bit; if the
PH_ALARM_TIMEOUT bit (b5, 09H) is ‘1’, this bit is cleared after a period ( = TIME_OUT_VALUE[5:0] (b5~0, 08H) X
MULTI_FACTOR[1:0] (b7~6, 08H) in second ) which starts from when the alarm is raised.
Reserved.
This bit indicates whether IN13 is in frequency hard alarm status.
0: No frequency hard alarm.
1: In frequency hard alarm status. (default)
This bit indicates whether IN13 is in no-activity alarm status.
0: No no-activity alarm.
1: In no-activity alarm status. (default)
This bit indicates whether IN13 is in phase lock alarm status.
0: No phase lock alarm. (default)
1: In phase lock alarm status.
If the PH_ALARM_TIMEOUT bit (b5, 09H) is ‘0’, this bit is cleared by writing ‘1’ to this bit; if the
PH_ALARM_TIMEOUT bit (b5, 09H) is ‘1’, this bit is cleared after a period ( = TIME_OUT_VALUE[5:0] (b5~0, 08H) X
MULTI_FACTOR[1:0] (b7~6, 08H) in second ) which starts from when the alarm is raised.
5
IN14_PH_LOC
K_ALARM
4
115
3
-
Description
IN13_FREQ_H
ARD_ALARM
2
IN13_NO_ACTI
VITY_ALARM
1
December 9, 2008
IN13_PH_LOC
K_ALARM
0
WAN PLL