EP2C5Q208C7N Altera, EP2C5Q208C7N Datasheet - Page 23

• Manufacturer Part Number: EP2C5Q208C7N
• Description: IC CYCLONE II FPGA 5K 208-PQFP
• Manufacturer: Altera
• Series: Cyclone® IIr

Specifications of EP2C5Q208C7N

• Number Of Logic Elements/cells: 4608
• Number Of Labs/clbs: 288
• Total Ram Bits: 119808
• Number Of I /o: 142
• Voltage - Supply: 1.15 V ~ 1.25 V
• Mounting Type: Surface Mount
• Operating Temperature: 0°C ~ 85°C
• Package / Case: 208-MQFP, 208-PQFP
• Family Name: Cyclone® II
• Number Of Logic Blocks/elements: 4608
• # I/os (max): 142
• Frequency (max): 402.58MHz
• Process Technology: 90nm
• Operating Supply Voltage (typ): 1.2V
• Logic Cells: 4608
• Ram Bits: 119808
• Operating Supply Voltage (min): 1.15V
• Operating Supply Voltage (max): 1.25V
• Operating Temp Range: 0C to 85C
• Operating Temperature Classification: Commercial
• Mounting: Surface Mount
• Pin Count: 208
• Package Type: PQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Number Of Gates: -
• Lead Free Status / Rohs Status: Compliant
• Other names: 544-1674

Figure 2–8. R4 Interconnect Connections
Notes to
(1)
(2)
Altera Corporation
February 2007
C4 interconnects can drive R4 interconnects.
This pattern is repeated for every LAB in the LAB row.
Figure
2–8:
R4 Interconnect
Driving Left
The direct link interconnect allows an LAB, M4K memory block, or
embedded multiplier block to drive into the local interconnect of its left
and right neighbors. Only one side of a PLL block interfaces with direct
link and row interconnects. The direct link interconnect provides fast
communication between adjacent LABs and/or blocks without using
row interconnect resources.
The R4 interconnects span four LABs, three LABs and one M4K memory
block, or three LABs and one embedded multiplier to the right or left of a
source LAB. These resources are used for fast row connections in a four-
LAB region. Every LAB has its own set of R4 interconnects to drive either
left or right.
R4 interconnects can drive and be driven by LABs, M4K memory blocks,
embedded multipliers, PLLs, and row IOEs. For LAB interfacing, a
primary LAB or LAB neighbor (see
interconnect. For R4 interconnects that drive to the right, the primary
LAB and right neighbor can drive on to the interconnect. For R4
interconnects that drive to the left, the primary LAB and its left neighbor
can drive on to the interconnect. R4 interconnects can drive other R4
interconnects to extend the range of LABs they can drive. Additionally,
R4 interconnects can drive R24 interconnects, C4, and C16 interconnects
for connections from one row to another.
Adjacent LAB can
Drive onto Another
LAB's R4 Interconnect
Neighbor
LAB
Figure 2–8
Primary
LAB (2)
shows R4 interconnect connections from an LAB.
C4 Column Interconnects (1)
Neighbor
LAB
Cyclone II Device Handbook, Volume 1
Figure
2–8) can drive a given R4
R4 Interconnect
Driving Right
Cyclone II Architecture
2–11