ISP1110VHTS ST-Ericsson Inc, ISP1110VHTS Datasheet - Page 6

• Manufacturer Part Number: ISP1110VHTS
• Description: IC USB TXRX W/UART 16-HBCC
• Manufacturer: ST-Ericsson Inc
• Type: Transceiverr

Specifications of ISP1110VHTS

• Number Of Drivers/receivers: 1/1
• Protocol: USB 2.0
• Voltage - Supply: 4 V ~ 5.5 V
• Mounting Type: Surface Mount
• Package / Case: 16-HBCC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 568-3149-2; ISP1110VH-G

NXP Semiconductors
ISP1110_2
Product data sheet
Table 2.
[1]
[2]
Symbol
V
V
VREG
V
UART_EN
GND
CC(5V0)
CC(UART)
CC(I/O)
Symbol names ending with underscore N, for example, _N, indicate active LOW signals.
I = input; O = output; I/O = digital input/output; AI/O = analog input/output.
[1]
Pin description
Pin
12
13
14
15
16
exposed
die pad
Type
-
-
-
-
I
-
Rev. 02 — 19 March 2007
…continued
[2]
Description
supply voltage input (4.0 V to 5.5 V); can be directly connected to
USB line V
supply voltage input (2.7 V to 4.5 V) for the UART signaling
internal regulator output; a decoupling capacitor of at least 0.1 F
is required
supply voltage for digital I/O pins (1.65 V to 2.85 V). When
V
This supply pin is totally independent of V
must never exceed VREG.
enable UART signaling mode when V
input pad; push-pull; CMOS
ground supply; down bonded to the exposed die pad (heat sink);
to be connected to the PCB ground
CC(I/O)
is not connected, the DP and DM pins are in off-state.
BUS
USB transceiver with UART signaling
CC(5V0)
CC(5V0)
is not present
© NXP B.V. 2007. All rights reserved.
ISP1110
and VREG, and
5 of 25