ICS1893Y-10LFT IDT, Integrated Device Technology Inc, ICS1893Y-10LFT Datasheet - Page 69
![no-image](/images/manufacturer_photos/0/3/324/idt__integrated_device_technology_inc_sml.jpg)
ICS1893Y-10LFT
Manufacturer Part Number
ICS1893Y-10LFT
Description
PHYCEIVER LOW PWR 3.3V 64-TQFP
Manufacturer
IDT, Integrated Device Technology Inc
Series
PHYceiver™r
Type
PHY Transceiverr
Specifications of ICS1893Y-10LFT
Protocol
MII
Voltage - Supply
3.14 V ~ 3.47 V
Mounting Type
Surface Mount
Package / Case
64-TQFP, 64-VQFP
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Number Of Drivers/receivers
-
Lead Free Status / RoHS Status
Compliant, Lead free / RoHS Compliant
Other names
1893Y-10LFT
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
ICS1893Y-10LFT
Manufacturer:
IDT, Integrated Device Technology Inc
Quantity:
10 000
8.3.6 IEEE Reserved Bits (bits 1.10:7)
8.3.7 MF Preamble Suppression (bit 1.6)
8.3.8 Auto-Negotiation Complete (bit 1.5)
ICS1893 Rev C 6/6/00
The IEEE reserves these bits for future use. When an STA:
•
•
Both the ISO/IEC standard and the ICS1893 reserve the use of some Management Register bits. ICS uses
some reserved bits to invoke ICS1893 test functions. To ensure proper operation of the ICS1893, an STA
must maintain the default value of these bits. Therefore, ICS recommends that an STA write the default
value to all reserved bits during all Management Register write operations.
Reserved bits 1.10:7 are Command Override Write (CW) bits. When bit 16.15, the Command Register
Override bit, is logic:
•
•
Status Register bit 1.6 is the Management Frame (MF) Preamble Suppression bit. The ICS1893 sets bit 1.6
to inform the STA of its ability to receive frames that do not have a preamble. When this bit is logic:
•
•
Although the ICS1893 supports Management Frame Preamble Suppression, its default value for bit 1.6 is
logic zero. This default value ensures that bit 1.6 is backward compatible with the ICS1890, which does not
have this capability. As the means of enabling this feature, the ICS1893 implements bit 1.6 as a Command
Override Write bit, instead of as a Read-Only bit as in the ICS1890. An STA uses the bit 1.6 to enable MF
Preamble Suppression in the ICS1893. [See the description of bit 16.15, the Command Override Write
Enable bit, in
An STA reads bit 1.5 to determine the state of the ICS1893 auto-negotiation process. The ICS1893 sets
the value of this bit using two criteria. When its Auto-Negotiation sublayer is:
•
•
Bit 1.5 is a latching high (LH) bit. (For more information on latching high and latching low bits, see
8.1.4.1, “ Latching High Bits”
Note:
Reads a reserved bit, the ICS1893 returns a logic zero.
Writes a reserved bit, the STA must use the default value specified in this data sheet.
Zero, the ICS1893 prevents all STA writes to CW bits.
One, an STA can modify the value of these bits.
Zero, the ICS1893 is indicating it cannot accept frames with a suppressed preamble.
One, the ICS1893 is indicating it can accept frames that do not have a preamble.
Disabled, the ICS1893 sets bit 1.5 to logic zero.
Enabled, the ICS1893 sets bit 1.5 to a value based on the state of the Auto-Negotiation State Machine.
In this case, it sets bit 1.5 to logic one only upon completion of the auto-negotiation process. This setting
indicates to the STA that a link is arbitrated and the contents of Management Registers 4, 5, and 6 are
valid. For details on the auto-negotiation process, see
ICS1893 - Release
An Auto-Negotiation Restart does not clear an LH bit. However, performing two consecutive reads
of this register provides the present state of the bit.
Section 8.11, “ Register 16: Extended Control Register”
and
Copyright © 2000, Integrated Circuit Systems, Inc.
All rights reserved.
Section 8.1.4.2, “ Latching Low Bits”
69
Section 7.2, “ Functional Block: Auto-Negotiation”
.]
.)
Chapter 8 Management Register Set
June, 2000
Section
.