TLE6254-3G Infineon Technologies, TLE6254-3G Datasheet - Page 3

• Manufacturer Part Number: TLE6254-3G
• Description: TXRX CAN FAULT TOLERANT PDSO-14
• Manufacturer: Infineon Technologies
• Type: Transceiverr

Specifications of TLE6254-3G

• Package / Case: DSO-14
• Number Of Drivers/receivers: 1/1
• Protocol: CAN
• Voltage - Supply: 4.75 V ~ 5.25 V
• Mounting Type: Surface Mount
• Product: Controller Area Network (CAN)
• Number Of Transceivers: 1
• Data Rate: 125 KBd
• Supply Voltage (max): 5.25 V, 27 V
• Supply Voltage (min): 4.75 V, 6 V
• Supply Current (max): 0.06 mA, 10 mA
• Maximum Operating Temperature: + 125 C
• Minimum Operating Temperature: - 40 C
• Mounting Style: SMD/SMT
• Power Down Mode: Sleep/Standby
• Operating Supply Voltage (max): 5.25/27V
• Operating Supply Voltage (typ): 5/9/12/15/18/24V
• Package Type: DSO
• Supply Current: 10mA
• Operating Temperature (max): 125C
• Operating Temperature (min): -40C
• Operating Temperature Classification: Automotive
• Mounting: Surface Mount
• Pin Count: 14
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: SP000014156; SP000316313; TLE6254-3G; TLE6254-3GTR; TLE62543GNT; TLE62543GT; TLE62543GXT

Fault Tolerant Low Speed CAN-Transceiver
Features
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Description
The CAN-Transceiver TLE6254-3G works as the interface between the CAN protocol
controller and the physical CAN bus-lines.
It is optimized for low-speed data transmission (up to 125 kBaud) in automotive and
industrial applications.
While no data is transferred, the power consumption can be minimized by multiple low
power modes.
In normal operation mode a differential signal is transmitted/received. When bus wiring
failures are detected the device automatically switches in a dedicated single-wire mode
to maintain communication.
Type
TLE6254-3G
Data Sheet
Data transmission rate up to 125 kBaud
Low current consumption in stand-by and sleep
operation mode, including BUS wake-up
Implemented receive-only mode
Optimized EMC behavior
Wake-up input pin, dual edge sensitive
Battery fail flag
Extended bus failure management to guarantee safe
operation during all bus line failure events
Support of failure conditions
Fully wake-up capability during all bus line failures conditions
Supports one-wire transmission mode with ground offset voltages up to 1.5 V
Prevention from bus occupation in case of CAN controller failure
Thermal protection
Bus line error protection against transients in automotive environment
Green Product (RoHS compliant)
AEC Qualified
3
Package
PG-DSO-14
Rev. 2.1, 2007-08-09
TLE6254-3G