ADV7343BSTZ Analog Devices Inc, ADV7343BSTZ Datasheet - Page 52

• Manufacturer Part Number: ADV7343BSTZ
• Description: IC ENCODER VIDEO W/DAC 64-LQFP
• Manufacturer: Analog Devices Inc
• Type: Video Encoderr

Specifications of ADV7343BSTZ

• Applications: DVD, Blu-Ray
• Voltage - Supply, Analog: 3.3V
• Voltage - Supply, Digital: 1.8V
• Mounting Type: Surface Mount
• Package / Case: 64-LQFP
• Supply Voltage Range: 1.71V To 1.89V
• Operating Temperature Range: -40°C To +85°C
• Tv / Video Case Style: LQFP
• No. Of Pins: 64
• Svhc: No SVHC (18-Jun-2010)
• Operating Temperature Max: 85°C
• Operating: RoHS Compliant
• Input Format: Digital
• Output Format: Analogue
• Dac Resolution: 11bit
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

ADV7342/ADV7343
SD VCR FF/RW SYNC
Subaddress 0x82, Bit 5
In DVD record applications where the encoder is used with a
decoder, the VCR FF/RW sync control bit can be used for non-
standard input video, that is, in fast forward or rewind mode.
In fast forward mode, the sync information at the start of a new
field in the incoming video usually occurs before the correct
number of lines/fields is reached. In rewind mode, this sync
signal usually occurs after the total number of lines/fields is
reached. Conventionally, this means that the output video has
corrupted field signals because one signal is generated by the
incoming video and another is generated when the internal
line/field counters reach the end of a field.
When the VCR FF/RW sync control is enabled (Subaddress 0x82,
Bit 5), the line/field counters are updated according to the
incoming VSYNC signal and when the analog output matches
the incoming VSYNC signal.
1
2
3
4
5
NO F
F
RTC
FOR EXAMPLE, VCR OR CABLE.
F
SEQUENCE BIT
RESET ADV7342/ADV7343 DDS.
SELECTED BY SUBADDRESS 0x01, BIT 7.
F
PAL: 0 = LINE NORMAL, 1 = LINE INVERTED
NTSC: 0 = NO CHANGE
SC
SC
SC
307
307
RESET APPLIED
Figure 62. SD Subcarrier Frequency Lock Timing and Connections Diagram (Subaddress 0x84, Bits [2:1] = 11)
PLL INCREMENT IS 22 BITS LONG. VALUE LOADED INTO ADV7342/ADV7343 F
PLL INCREMENTS BITS[21:0] PLUS BITS[0:9] OF SUBCARRIER FREQUENCY REGISTERS.
SC
RESET APPLIED
H/L TRANSITION
COMPOSITE
COUNT START
VIDEO
Figure 61. SD Subcarrier Phase Reset Timing Diagram (Subaddress 0x84, Bits [2:1] = 01)
TIME SLOT 01
DISPLAY
DISPLAY
128
1
310
310
LOW
ADV7403
VIDEO
DECODER
13
LLC1
SUBCARRIER
14 BITS
PHASE
P[19:12]
SFL
14
0
313
313
4 BITS
RESERVED
START OF FIELD 4 OR 8
START OF FIELD 4 OR 8
Rev. A | Page 52 of 104
21
19
ADV7342/ADV7343
CLKIN_A
SFL
Y[7:0]/S[7:0]
SAMPLE
F
VALID
SC
This control is available in all slave-timing modes except Slave
Mode 0.
VERTICAL BLANKING INTERVAL
Subaddress 0x31, Bit 4; Subaddress 0x83, Bit 4
The ADV7342/ADV7343 are able to accept input data that
contains VBI data (such as CGMS, WSS, and VITS) in SD, ED,
and HD modes.
If VBI is disabled (Subaddress 0x31, Bit 4 for ED/HD;
Subaddress 0x83, Bit 4 for SD), VBI data is not present at the
output and the entire VBI is blanked. These control bits are
valid in all master and slave timing modes.
For the SMPTE 293M (525p) standard, VBI data can be
inserted on Line 13 to Line 42 of each frame or on Line 6 to
Line 43 for the ITU-R BT.1358 (625p) standard.
VBI data can be present on Line 10 to Line 20 for NTSC and on
Line 7 to Line 22 for PAL.
PLL INCREMENT
5
INVALID
SAMPLE
DAC 1
DAC 2
DAC 3
DAC 4
DAC 5
DAC 6
SC
DDS REGISTER IS
2
F
320
320
SC
8/LINE
LOCKED
CLOCK
SEQUENCE
F
SC
PHASE = FIELD 4 OR 8
PHASE = FIELD 1
0
BIT
3
F
6768
SC
5 BITS
RESERVED
RESET PULSE
RESERVED
RESET BIT
4