LPC1754FBD80,518 NXP Semiconductors, LPC1754FBD80,518 Datasheet - Page 14

• Manufacturer Part Number: LPC1754FBD80,518
• Description: IC MCU 32BIT 128KB FLASH 80LQFP
• Manufacturer: NXP Semiconductors
• Series: LPC17xxr

Specifications of LPC1754FBD80,518

• Core Processor: ARM® Cortex-M3™
• Core Size: 32-Bit
• Speed: 100MHz
• Connectivity: CAN, I²C, IrDA, Microwire, SPI, SSI, SSP, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, DMA, Motor Control PWM, POR, PWM, WDT
• Number Of I /o: 52
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Eeprom Size: -
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.4 V ~ 3.6 V
• Data Converters: A/D 6x12b, D/A 1x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 80-LQFP
• Package: 80LQFP
• Device Core: ARM Cortex M3
• Family Name: LPC1700
• Maximum Speed: 100 MHz
• Operating Supply Voltage: 3.3 V
• Data Bus Width: 32 Bit
• Number Of Programmable I/os: 52
• Interface Type: CAN/I2C/SPI/UART/USB
• On-chip Adc: 6-chx12-bit
• Number Of Timers: 4
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

NXP Semiconductors
LPC1759_58_56_54_52_51
Product data sheet
7.6 Memory map
The MPU allows separating processing tasks by disallowing access to each other's data,
disabling access to memory regions, allowing memory regions to be defined as read-only
and detecting unexpected memory accesses that could potentially break the system.
The MPU separates the memory into distinct regions and implements protection by
preventing disallowed accesses. The MPU supports up to 8 regions each of which can be
divided into 8 subregions. Accesses to memory locations that are not defined in the MPU
regions, or not permitted by the region setting, will cause the Memory Management Fault
exception to take place.
The LPC1759/58/56/54/52/51 incorporate several distinct memory regions, shown in the
following figures.
user program viewpoint following reset. The interrupt vector area supports address
remapping.
The AHB peripheral area is 2 MB in size, and is divided to allow for up to 128 peripherals.
The APB peripheral area is 1 MB in size and is divided to allow for up to 64 peripherals.
Each peripheral of either type is allocated 16 kB of space. This allows simplifying the
address decoding for each peripheral.
All information provided in this document is subject to legal disclaimers.
Figure 3
Rev. 7 — 29 March 2011
shows the overall map of the entire address space from the
LPC1759/58/56/54/52/51
32-bit ARM Cortex-M3 microcontroller
© NXP B.V. 2011. All rights reserved.
14 of 74