STM32F405RGT6 STMicroelectronics, STM32F405RGT6 Datasheet - Page 24

• Manufacturer Part Number: STM32F405RGT6
• Description: Microcontrollers (MCU) ARM M4 1024 FLASH 168 Mhz 192kB SRAM
• Manufacturer: STMicroelectronics

Specifications of STM32F405RGT6

• Core: ARM Cortex M4
• Processor Series: STM32F4
• Data Bus Width: 32 bit
• Maximum Clock Frequency: 168 MHz
• Program Memory Size: 1024 KB
• Data Ram Size: 192 KB
• On-chip Adc: Yes
• Number Of Programmable I/os: 51
• Number Of Timers: 10
• Operating Supply Voltage: 1.7 V to 3.6 V
• Package / Case: LQFP-64
• Mounting Style: SMD/SMT
• A/d Bit Size: 12 bit
• A/d Channels Available: 16
• Interface Type: CAN, I2C, I2S, SPI, UART
• Program Memory Type: Flash
• Lead Free Status / Rohs Status: Details

Description
24/167
V
operates in the 0 to 70 °C temperature range and PDR is disabled.
●
Figure 7.
DD
minimum value is 1.8 V. V
There are three low-power modes:
–
–
–
Regulator ON/internal reset OFF
The regulator ON with internal reset OFF mode is not available on LQFP64 and
LQFP100 packages.
On LQFP144, and LQFP176 packages, the internal reset is controlled by applying an
inverted reset signal to PDR_ON pin.
On UFBGA176 package, the internal regulator must be activated by connecting
BYPASS_REG to V
On LQFP176 packages, the internal reset must be activated by applying an inverted
reset signal to PDR_ON pin.
The NRST pin should be controlled by an external reset controller to keep the device
under reset when V
MR is used in the nominal regulation mode (Run)
LPR is used in the Stop modes
Power-down is used in Standby mode: the regulator output is in high impedance:
the kernel circuitry is powered down, inducing zero consumption (but the contents
of the registers and SRAM are lost).
Regulator ON/internal reset OFF
SS
DD
.
is below 1.8 V (see
Doc ID 022152 Rev 2
DD
/V
DDA
minimum value of 1.7 V is obtained when the device
Figure
7).
STM32F405xx, STM32F407xx