AT32UC3B0256 Atmel Corporation, AT32UC3B0256 Datasheet - Page 471

• Manufacturer Part Number: AT32UC3B0256
• Manufacturer: Atmel Corporation

Specifications of AT32UC3B0256

• Flash (kbytes): 256 Kbytes
• Pin Count: 64
• Max. Operating Frequency: 60 MHz
• Cpu: 32-bit AVR
• # Of Touch Channels: 32
• Hardware Qtouch Acquisition: No
• Max I/o Pins: 44
• Ext Interrupts: 44
• Usb Transceiver: 1
• Usb Speed: Full Speed
• Usb Interface: Device + OTG
• Spi: 4
• Twi (i2c): 1
• Uart: 3
• Ssc: 1
• Graphic Lcd: No
• Video Decoder: No
• Camera Interface: No
• Adc Channels: 8
• Adc Resolution (bits): 10
• Adc Speed (ksps): 384
• Resistive Touch Screen: No
• Temp. Sensor: No
• Crypto Engine: No
• Sram (kbytes): 32
• Self Program Memory: YES
• Dram Memory: No
• Nand Interface: No
• Picopower: No
• Temp. Range (deg C): -40 to 85
• I/o Supply Class: 3.0-3.6 or (1.65-1.95+3.0-3.6)
• Operating Voltage (vcc): 3.0-3.6 or (1.65-1.95+3.0-3.6)
• Fpu: No
• Mpu / Mmu: Yes / No
• Timers: 10
• Output Compare Channels: 16
• Input Capture Channels: 6
• Pwm Channels: 13
• 32khz Rtc: Yes
• Calibrated Rc Oscillator: Yes

22.8.4
32059L–AVR32–01/2012
USB Pipe/Endpoint n FIFO Data Register (USBFIFOnDATA)
The application has access to the physical DPRAM reserved for the Endpoint/Pipe through a
64KB virtual address space. The application can access anywhere in the virtual 64KB segment
(linearly or fixedly) as the DPRAM Fifo address increment is fully handled by hardware. Byte,
half-word and word access are supported. Data should be access in a big-endian way.
For instance, if the application wants to write into the Endpoint/Pipe3, it can access anywhere in
the USBFIFO3DATA HSB segment address. i.e : an access to the 0x30000 offset, is strictly
equivalent to an access to the 0x3FFFC offset.
Note that the virtual address space size (64KB) has nothing to do with the Endpoint/Pipe size.
Disabling the USBB (by writing a zero to the USBE bit) does not reset the DPRAM.
471