ATxmega16D4 Atmel Corporation, ATxmega16D4 Datasheet - Page 282

• Manufacturer Part Number: ATxmega16D4
• Manufacturer: Atmel Corporation

Specifications of ATxmega16D4

• Flash (kbytes): 16 Kbytes
• Pin Count: 44
• Max. Operating Frequency: 32 MHz
• Cpu: 8-bit AVR
• # Of Touch Channels: 16
• Hardware Qtouch Acquisition: No
• Max I/o Pins: 34
• Ext Interrupts: 34
• Usb Speed: No
• Usb Interface: No
• Spi: 4
• Twi (i2c): 2
• Uart: 2
• Graphic Lcd: No
• Video Decoder: No
• Camera Interface: No
• Adc Channels: 12
• Adc Resolution (bits): 12
• Adc Speed (ksps): 200
• Analog Comparators: 2
• Resistive Touch Screen: No
• Temp. Sensor: Yes
• Crypto Engine: No
• Sram (kbytes): 2
• Eeprom (bytes): 1024
• Self Program Memory: YES
• Dram Memory: No
• Nand Interface: No
• Picopower: Yes
• Temp. Range (deg C): -40 to 85
• I/o Supply Class: 1.6 to 3.6
• Operating Voltage (vcc): 1.6 to 3.6
• Fpu: No
• Mpu / Mmu: no / no
• Timers: 4
• Output Compare Channels: 14
• Input Capture Channels: 14
• Pwm Channels: 14
• 32khz Rtc: Yes
• Calibrated Rc Oscillator: Yes

23.10.2.7
23.10.2.8
23.10.2.9
8210B–AVR–04/10
Erase Application Section / Boot Loader Section Page
Application Section / Boot Loader Section Page Write
Erase & Write Application Section / Boot Loader Section Page
The Erase Application Section Page Erase and Erase Boot Loader Section Page commands are
used to erase one page in the Application Section or Boot Loader Section.
The BUSY flag in the NVM STATUS register will be set until the erase operation is finished. The
FBUSY flag is set as long the Flash is Busy, and the Application section cannot be accessed.
The Write Application Section Page and Write Boot Loader Section Page commands are used to
write the Flash Page Buffer into one flash page in the Application Section or Boot Loader
Section.
The BUSY flag in the NVM STATUS register will be set until the write operation is finished. The
FBUSY flag is set as long the Flash is Busy, and the Application section cannot be accessed.
An invalid page address in the Z-pointer will abort the NVM command. The Erase Application
Section Page command requires that the Z-pointer addresses the Application section, and the
Erase Boot Section Page command requires that the Z-pointer addresses the Boot Loader
Section.
The Erase & Write Application Section Page and Erase & Write Boot Loader Section Page com-
mands are used to erase one flash page and then write the Flash Page Buffer into that flash
page in the Application Section or Boot Loader Section, in one atomic operation.
The BUSY flag in the NVM STATUS register will be set until the operation is finished. The
FBUSY flag is set as long the Flash is Busy, and the Application section cannot be accessed.
An invalid page address in the Z-pointer will abort the NVM command. The Erase & Write Appli-
cation Section command requires that the Z-pointer addresses the Application section, and the
Erase & Write Boot Section Page command requires that the Z-pointer addresses the Boot
Loader Section.
1. Load the Z-pointer with the flash page address to erase. The page address must be
2. Load the NVM CMD register with the Erase Application/Boot Section Page command.
3. Execute the SPM instruction. This requires the timed CCP sequence during self-
1. Load the Z-pointer with the flash page to write. The page address must be written to
2. Load the NVM CMD register with the Write Application Section/Boot Loader Section
3. Execute the SPM instruction. This requires the timed CCP sequence during self-
1. Load the Z-pointer with the flash page to write. The page address must be written to
2. Load the NVM CMD register with the Erase & Write Application Section/Boot Loader
3. Execute the SPM instruction. This requires the timed CCP sequence during self-
written to ZPAGE. Other bits in the Z-pointer will be ignored during this operation.
programming.
PCPAGE. Other bits in the Z-pointer will be ignored during this operation.
Page command.
programming.
PCPAGE. Other bits in the Z-pointer will be ignored during this operation.
Section Page command.
programming.
XMEGA D
282