MM74HC126M Fairchild Semiconductor, MM74HC126M Datasheet - Page 9

• Manufacturer Part Number: MM74HC126M
• Description: IC BUFF TRI-ST QD N-INV 14SOIC
• Manufacturer: Fairchild Semiconductor
• Series: 74HCr

Specifications of MM74HC126M

• Logic Type: Buffer/Line Driver, Non-Inverting
• Number Of Elements: 4
• Number Of Bits Per Element: 1
• Current - Output High, Low: 7.8mA, 7.8mA
• Voltage - Supply: 2 V ~ 6 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 14-SOIC (3.9mm Width), 14-SOL
• Logic Family: 74HC
• Number Of Channels Per Chip: Quad
• Polarity: Non-Inverting
• Supply Voltage (max): 6 V
• Supply Voltage (min): 2 V
• Maximum Operating Temperature: 85 C
• Mounting Style: SMD/SMT
• High Level Output Current: - 7.8 mA
• Input Bias Current (max): 8 uA
• Low Level Output Current: 7.8 mA
• Maximum Power Dissipation: 500 mW
• Minimum Operating Temperature: - 40 C
• Number Of Lines (input / Output): 1
• Output Type: 3-State
• Propagation Delay Time: 130 ns @ 2 V or 26 ns @ 4.5 V or 22 ns @ 6 V
• Logic Device Type: Buffer, Non Inverting
• Supply Voltage Range: 2V To 6V
• Logic Case Style: SOIC
• No. Of Pins: 14
• Operating Temperature Range: -40°C To +85°C
• Filter Terminals: SMD
• Rohs Compliant: Yes
• Family Type: HC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

©1983 Fairchild Semiconductor Corporation
MM74HC125, MM74HC126 Rev. 1.3.0
Physical Dimensions
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or
obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions,
specifically the warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/
(1.74)
3.17
3.81
NOTES: UNLESS OTHERWISE SPECIFIED
3.56
3.30
C)
A)
B) ALL DIMENSIONS ARE IN MILLIMETERS.
D) DIMENSIONS AND TOLERANCES PER
E) DRAWING FILE NAME: MKT-N14AREV7
THIS PACKAGE CONFORMS TO
MOLD FLASH, AND TIE BAR EXTRUSIONS.
JEDEC MS-001 VARIATION BA
DIMENSIONS ARE EXCLUSIVE OF BURRS,
ASME Y14.5-1994
Figure 4. 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide
14
1
0.58
0.35
(Continued)
19.56
18.80
1.77
1.14
2.54
8
7
0.38 MIN
9
5.33 MAX
6.60
6.09
8.12
7.62
8.82
www.fairchildsemi.com
0.35
0.20