EMS6500 EM Microelectronic, EMS6500 Datasheet - Page 139

• Manufacturer Part Number: EMS6500
• Description: Microcontroller Development System 4-bit (Emmon), Simulators 4-bit
• Manufacturer: EM Microelectronic

Copyright  2003, EM Microelectronic-Marin SA
3.2.1. Status LED's
3.2. Programming in standalone mode
1) Open the MFP Interface Window in the EM microcontroller development system.
2) Set up the parameters in the Options menu.
3) Choose the correct file (Browse).
4) press Connect
5) press Download
6) If checksum master and checksum programmer are identical select Standalone
in operating mode.
7) The programmer is ready to work alone if the standalone LED's is switch on.
8) Press programming button.
Busy LED :
Correct LED : Indicates that the CRC of the master fits with the CRC of the
Error LED :
BUFFERED
PORT
BAUD
DTR
RTS
Works during each transmission from programmer to device.
device. No error occurred during the programming.
Error occurred during the programming or chip not present.
OPTIONAL
COM2
19200
X
X
7
Programming Interface
www.emmicroelectronic.com
EM65xx
Binder 4.3-01/03 Rev. B/495