EMS6500 EM Microelectronic, EMS6500 Datasheet - Page 25

• Manufacturer Part Number: EMS6500
• Description: Microcontroller Development System 4-bit (Emmon), Simulators 4-bit
• Manufacturer: EM Microelectronic

Copyright  2003, EM Microelectronic-Marin SA
2.9.1.1.4.
2.9.1.1.5.
2.9.1.1.6.
2.9.1.1.7.
2.9.1.1.8.
2.9.1.1.9.
The meaning of this button depends on the working mode (VICE or ICE) as follows :
in VICE-mode : it produces a general RESET (cold reset), that is, all registers are
reset to initial values and the RAM is zeroed.
In ICE-mode : it only produces a program reset (warm reset), that is, only stack
pointer, program counters, index registers are initialized.
When the emulator has suspended its execution, this button restarts the program
execution at the address pointed to by the active PC.
When the emulator is running, this button enables the user to suspend the execution
of the application program. The emulator stops execution before the instruction
pointed to by the active PC.
When the emulator has suspended its execution, this button enables the user to
execute a single instruction. The instruction is that pointed to by the active program
counter.
When the Emulator has suspended its execution, this button enables the user to
activate the animation mode of the emulator. In this mode 1 instruction is executed
every 1 second until the mode is deactivated with the stop button. Animation starts
at the instruction pointed to by the active program counter.
This button
l b ll
Reset Execution Button
Continue Button
Stop Button
Step Button
Animation Button
Instruction Break Enable Button.
Instruction Break Enabled
Instruction Break Disabled
17
Development System
www.emmicroelectronic.com
EM66xx
Binder 4.3-01/03 Rev. B/495