adsp-21266skstz-2b Analog Devices, Inc., adsp-21266skstz-2b Datasheet - Page 11

• Manufacturer Part Number: adsp-21266skstz-2b
• Description: Sharc Embedded Processor
• Manufacturer: Analog Devices, Inc.

ADSP-21261/ADSP-21262/ADSP-21266
DESIGNING AN EMULATOR-COMPATIBLE DSP
BOARD (TARGET)
The Analog Devices family of emulators are tools that every
DSP developer needs to test and debug hardware and software
systems. Analog Devices has supplied an IEEE 1149.1 JTAG test
access port (TAP) on each JTAG DSP. Nonintrusive in-circuit
emulation is assured by the use of the processor’s JTAG inter-
face—the emulator does not affect target system loading or
timing. The emulator uses the TAP to access the internal fea­
tures of the DSP, allowing the developer to load code, set
breakpoints, observe variables, observe memory, and examine
registers. The DSP must be halted to send data and commands,
but once an operation has been completed by the emulator, the
DSP system is set running at full speed with no impact on sys­
tem timing.
To use these emulators, the target board must include a header
that connects the DSP’s JTAG port to the emulator.
For details on target board design issues including mechanical
layout, single processor connections, multiprocessor scan
chains, signal buffering, signal termination, and emulator pod
logic, see the EE-68: Analog Devices JTAG Emulation Technical
Reference on the Analog Devices website (www.analog.com)—
use site search on “EE-68.” This document is updated regularly
to keep pace with improvements to emulator support.
ADDITIONAL INFORMATION
This data sheet provides a general overview of the ADSP-2126x
architecture and functionality. For detailed information on the
ADSP-2126x family core architecture and instruction set, refer
to the ADSP-2126x SHARC DSP Core Manual and the
ADSP-21160 SHARC DSP Instruction Set Reference.
Rev. E | Page 11 of 48 | July 2008