tda5225 Infineon Technologies Corporation, tda5225 Datasheet - Page 16

• Manufacturer Part Number: tda5225
• Description: Enhanced Sensitivity Multi-channel Quad-conf Igurat Ion Receiver With Digital Slicer
• Manufacturer: Infineon Technologies Corporation

2.4
2.4.1
A fully integrated Sigma-Delta Fractional-N PLL Synthesizer covers the frequency bands
300-320 MHz, 425-450 MHz, 863-870 MHz, 902-928 MHz with a high frequency
resolution, using only one VCO running at around 3.6 GHz. This makes the IC most
suitable for Multi-Band/Multi-Channel applications.
For Multi-Channel applications a very good channel separation is essential. To achieve
the necessary high sensitivity and selectivity a double down conversion super-
heterodyne architecture is used. The first IF frequency is located around 10.7 MHz and
the second IF frequency around 274 kHz. For both IF frequencies an adjustment-free
image frequency rejection feature is realized. In the second IF domain the filtering is
done with an on-chip third order bandpass polyphase filter. A multi-stage bandpass
limiter completes the RF/IF path of the receiver. For Single-Channel applications with
relaxed requirements to selectivity, a single down conversion low-IF scheme can be
selected.
For Multi-Channel systems where even higher channel separation is required, up to two
(switchable) external ceramic (CER) filters can be used to improve the selectivity.
An RSSI generator delivers a DC signal proportional to the applied input power and is
also used as an ASK demodulator. Via an anti-aliasing filter this signal feeds an ADC
with 10 bits resolution.
The harmonic suppressed limiter output signal feeds a digital FSK demodulator. This
block demodulates the FSK data and delivers an AFC signal which controls the divider
factor of the PLL synthesizer.
A digital receiver, which comprises RSSI peak detectors, a matched data filter and a data
slicer, decodes the received ASK or FSK data stream. The received data signal is
accessible via one of the port pins.
The crystal oscillator serves as the reference frequency for the PLL phase detector, the
clock signal of the Sigma-Delta modulator and divided by two as the 2
signal. To accelerate the start up time of the crystal oscillator two modes are selectable:
a Low Power Mode (with lower precision) and a High Precision Mode.
Data Sheet
Functional Block Description
Architecture Overview
16
Functional Description
nd
V1.0, 2010-02-19
local oscillator
TDA5225