p89lpc9171fdh NXP Semiconductors, p89lpc9171fdh Datasheet - Page 63

• Manufacturer Part Number: p89lpc9171fdh
• Description: 8-bit Microcontroller With Accelerated Two-clock 80c51 Core, 2 Kb 3 V Byte-erasable Flash With 8-bit Adc
• Manufacturer: NXP Semiconductors

NXP Semiconductors
P89LPC9151_61_71_2
Product data sheet
8.7 DAC output to a port pin with high output impedance
8.8 Clock divider
8.9 Power-down and Idle mode
criteria, the boundary limits will again be compared after all 8 bits have been converted.
The boundary status register (BNDSTA0) flags the channels which caused a boundary
interrupt.
The DAC block of ADC1 can be output to a port pin. In this mode, the AD1DAT3 register is
used to hold the value fed to the DAC. After a value has been written to the DAC (written
to AD1DAT3), the DAC output will appear on the channel 3 pin.
The ADC requires that its internal clock source be in the range of 320 kHz to 8 MHz to
maintain accuracy. A programmable clock divider that divides the clock from 1 to 8 is
provided for this purpose.
In Idle mode the A/C converter, if enabled, will continue to function and can cause the
device to exit Idle mode when the conversion is completed if the A/D interrupt is enabled.
In Power-down mode or Total Power-down mode, the A/D does not function. If the A/D is
enabled, it will consume power. Power can be reduced by disabling the A/D.
Rev. 02 — 9 February 2010
P89LPC9151/9161/9171
8-bit microcontroller with 8-bit ADC
© NXP B.V. 2010. All rights reserved.
63 of 91