wm8961 Wolfson Microelectronics plc, wm8961 Datasheet - Page 47

no-image

wm8961

Manufacturer Part Number
wm8961
Description
Ultra-low Power Stereo Codec With 1w Stereo Class D Speaker Drivers And Ground Referenced Headphone Drivers
Manufacturer
Wolfson Microelectronics plc
Datasheet
WM8961
Pre-Production
Note that the register write to CP_DYN_PWR[1:0] must take place before the charge pump is
enabled. See the “Charge Pump” section.
SPEAKER OUTPUTS
The SPK_LP/SPK_LN and SPK_RP/SPK_RN output pins are class D speaker drivers. Each pair is
independently controlled and can drive an 8Ω BTL speaker. Output PGA volume is relative to AVDD,
while an additional boost stage (set by CLASSD_ACGAIN[2:0] ) is available to accommodate higher
SPKVDD1/SPKVDD2 supply voltages. This allows AVDD to be run at a lower voltage to save power,
while maximum output power can be delivered to the load, utilising the full range of SPKVDD1 and
SPKVDD2 supplies.
The output gain stage automatically centers the analogue output about
SPKVDD/2.
This
will
avoid
the
analogue
output
clipping
except
in
the
case
of
CLASSD_ACGAIN=12dB. The speaker output stage is illustrated in Figure 20
Figure 20 Speaker Output Stage
PP, August 2009, Rev 3.1
w
47

Related parts for wm8961