h55s1g62mfp-60 Hynix Semiconductor, h55s1g62mfp-60 Datasheet - Page 22

• Manufacturer Part Number: h55s1g62mfp-60
• Description: 64mx16bit Mobile Sdram
• Manufacturer: Hynix Semiconductor

11
1Gbit (64Mx16bit) Mobile SDR Memory
H55S1G62MFP Series
Notes :
1. H: Logic High, L: Logic Low, X: Don't care, BA: Bank Address, AP: Auto Precharge.
2. All entries assume that CKE was active during the preceding clock cycle.
3. If both banks are idle and CKE is inactive, then in power down cycle
4. Illegal to bank in specified states. Function may be legal in the bank indicated by Bank Address,
depending on the state of that bank.
5. If both banks are idle and CKE is inactive, then Self Refresh mode.
6. Illegal if tRCD is not satisfied.
7. Illegal if tRAS is not satisfied.
8. Must satisfy burst interrupt condition.
9. Must satisfy bus contention, bus turn around, and/or write recovery requirements.
10. Must mask preceding data which don't satisfy tDPL.
11. Illegal if tRRD is not satisfied
12. Illegal for single bank, but legal for other banks in multi-bank devices.
13. Illegal for all banks.
14. Mode Register Set and Extended Mode Register Set is same command truth table except BA1.
Rev 1.2 / Jul. 2008
22