PIC18F25K80 MICROCHIP [Microchip Technology], PIC18F25K80 Datasheet - Page 207

• Manufacturer Part Number: PIC18F25K80
• Manufacturer: MICROCHIP [Microchip Technology]

REGISTER 12-1:
 2011 Microchip Technology Inc.
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7
bit 6
bit 5
bit 4
bit 3
bit 2-1
bit 0
Note 1:
MDEN
R/W-0
2:
The MDBIT must be selected as the modulation source in the MDSRC register for this operation.
The modulated output frequency can be greater and asynchronous from the clock that updates this
register bit. The bit value may not be valid for higher speed modulator or carrier signals.
MDEN: Modulator Module Enable bit
1 = Modulator module is enabled and mixing input signals
0 = Modulator module is disabled and has no output
MDOE: Modulator Module Pin Output Enable bit
1 = Modulator pin output enabled
0 = Modulator pin output disabled
MDSLR: MDOUT Pin Slew Rate Limiting bit
1 = MDOUT pin slew rate limiting enabled
0 = MDOUT pin slew rate limiting disabled
MDOPOL: Modulator Output Polarity Select bit
1 = Modulator output signal is inverted
0 = Modulator output signal is not inverted
MDO: Modulator Output bit
Displays the current output value of the modulator module.
Unimplemented: Read as ‘ 0 ’
MDBIT: Modulator Source Input bit
Allows software to manually set modulation source input to module.
MDOE
R/W-0
MDCON: MODULATION CONTROL REGISTER
W = Writable bit
‘1’ = Bit is set
MDSLR
R/W-1
MDOPOL
R/W-0
Preliminary
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
PIC18F66K80 FAMILY
R/W-0
MDO
(2)
U-0
—
(1)
x = Bit is unknown
U-0
—
DS39977C-page 207
MDBIT
R/W-0
bit 0