V23836-C18-C363 Infineon Technologies, V23836-C18-C363 Datasheet - Page 11

• Manufacturer Part Number: V23836-C18-C363
• Description: 1x9 Transceiver with Duplex SC Receptacle Single Mode 1300 nm 21 km SONET OC-3 / SDH STM-1
• Manufacturer: Infineon Technologies

V23836-C18-C63
V23836-C18-C363
Application Notes
This application note assumes Fiber Optic transceivers using 5 V/3.3 V power supply
and SerDes Chips using either 3.3 V or 5 V power supply. It also assumes no self biasing
at the receiver data inputs (RD+/RD–) of the SerDes chip (Refer to the manufacturer
data sheet for other applications).
V
Value of R1...R4 may vary as long as proper 50
termination to
or 100
differential
EE
is provided. The power supply filtering is required for good EMI performance. Use short
V
V
tracks from the inductor L1/L2 to the module
Rx/
Tx. Further application notes for
CC
CC
electrical interfacing are available upon request. Ask for Appnote 82.
V
We strongly recommend a
plane under the module for getting good EMI
EE
performance.
The transceiver contains an automatic shutdown circuit. Reset is only possible if the
V
V
power is turned off, and then on again. (
Tx switched below
).
CC
TH
Preliminary Product Information
11
2004-02-13