THNCFxxxMAA Toshiba, THNCFxxxMAA Datasheet - Page 36

• Manufacturer Part Number: THNCFxxxMAA
• Description: Small Form Factor Card
• Manufacturer: Toshiba

23.
24.
25.
26.
27.
28.
29.
30.
compatibility.
needed.
buffer with any data pattern desired.
similar to the Write Sector(s) command except that it writes 516 bytes instead of 512 bytes.
presented on each sector, but on the transfer of a block which contains the number of sectors defined by Set
Multiple command.
the exception that an implied erase before write operation is not performed.
Sector Count register.
specified in the Sector Number register.
the exception that an implied erase before write operation is not performed.
verified immediately after being written.
Wear Level (code: F5H): This command effectively a NOP command and only implemented for backward
Write Buffer (code: E8H): This command enables the host to overwrite contents of the Card’s sector
Write Long Sector (code: 32H or 33H): This command is provided for compatibility purposes and is
Write Multiple (code: C5H): This command is similar to the Write Sectors command. Interrupts are not
Write Multiple without Erase (code: CDH): This command is similar to the Write Multiple command with
Write Sector(s): (code: 30H or 31H): This command writes from 1 to 256 sectors as specified in the
Write Sector(s) without Erase (code: 38H): This command is similar to the Write Sector(s) command with
Write Verify (code: 3CH): This command is similar to the Write Sector(s) command, except each sector is
The Sector Count Register will always be returned with a 00H indicating Wear Level is not
A sector count of zero requests 256 sectors.
The transfer begins at the sector
THNCFxxxMAA Series
Preliminary version
2001-09-05 36/52