1893CFLFT IDT, 1893CFLFT Datasheet - Page 13

• Manufacturer Part Number: 1893CFLFT
• Description: Ethernet ICs 3.3V 10/100 BASE TX INTEGRATED PHYCEIVER
• Manufacturer: IDT

Specifications of 1893CFLFT

• Rohs: yes
• Part # Aliases: ICS1893CFLFT

4.3 Automatic Power-Saving Operations
4.4 Auto-Negotiation Operations
ICS1893CK-40, Rev. C, 06/02/09
The ICS1893CK-40 has power-saving features that automatically minimize its total power consumption
while it is operating.
modes.
Table 4-1. Automatic Power-Saving Features, 10Base-T and 100Base-TX Modes
The ICS1893CK-40 has an Auto-Negotiation sublayer and provides a Control Register bit (bit 0.12) to
determine whether its Auto-Negotiation sublayer is enabled or disabled.
When enabled, the ICS1893CK-40 Auto-Negotiation sublayer exchanges technology capability data with
its remote link partner and automatically selects the highest-performance operating mode it has in common
with its remote link partner. For example, if the ICS1893CK-40 supports 100Base-TX and 10Base-T modes
– but its link partner supports 100Base-TX and 100Base-T4 modes – the two devices automatically select
100Base-TX as the highest-performance common operating mode. For details regarding initialization and
control of the auto-negotiation process, see
Disable Inter-
nal Modules
STA Control
of Automatic
Power-
Saving
Features
Feature
Power-
Saving
ICS1893CK-40 Data Sheet Rev. C - Release
In 10Base-T mode, the ICS1893CK-40
disables all its internal 100Base-TX
modules.
When an STA sets the state of the
ICS1893CK-40 Extended Control Register
2, bit 19.0 to logic:
•
•
Zero, the 100Base-TX modules always
remain enabled, even during 10Base-T
operations.
One, the ICS1893CK-40 automatically
disables 100Base-TX modules while the
ICS1893CK-40 is operating in 10Base-T
mode.
Table 4-1
Copyright © 2009, Integrated Device Technology, Inc.
10Base-T Mode
lists the ICS1893CK-40 automatic power-saving features for the various
Section 6.2, “Functional Block:
All rights reserved.
13
Mode for ICS1893CK-40
In 100Base-TX mode, the ICS1893CK-40
disables all its internal 10Base-T modules.
When an STA sets the state of the
ICS1893CK-40 Extended Control Register
2, bit 19.1 to logic:
•
•
remain enabled, even during
100Base-TX operations.
disables 10Base-T modules while the
ICS1893CK-40 is operating in
100Base-TX mode.
Zero, the 10Base-T modules always
One, the ICS1893CK-40 automatically
Chapter 4 Operating Modes Overview
100Base-TX Mode
Auto-Negotiation”.
June 2009