ADP1048DC1-EVALZ Analog Devices, ADP1048DC1-EVALZ Datasheet - Page 57

• Manufacturer Part Number: ADP1048DC1-EVALZ
• Description: Daughter Cards & OEM Boards ADP1048 DAUGHTERCARD
• Manufacturer: Analog Devices
• Series: ADP1048r

Specifications of ADP1048DC1-EVALZ

• Rohs: yes
• Product: Daughter Cards
• Description/function: 100 kHz daughter board
• Dimensions: 40 mm x 25 mm
• Interface Type: I2C
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Operating Supply Voltage: 3.3 V
• Factory Pack Quantity: 1
• For Use With: ADP1048

Data Sheet
EEPROM_CRC_CHKSUM REGISTER
Table 56. Register 0xD1—EEPROM_CRC_CHKSUM
Bits
[7:0]
EEPROM_NUM_RD_BYTES REGISTER
Table 57. Register 0xD2—EEPROM_NUM_RD_BYTES
Bits
[7:0]
EEPROM_ADDR_OFFSET REGISTER
Table 58. Register 0xD3—EEPROM_ADDR_OFFSET
Bits
[15:0]
EEPROM_PAGE_ERASE REGISTER
Table 59. Register 0xD4—EEPROM_PAGE_ERASE
Bits
[7:0]
EEPROM_PASSWORD REGISTER
Table 60. Register 0xD5—EEPROM_PASSWORD
Bits
[7:0]
TRIM_PASSWORD REGISTER
Table 61. Register 0xD6—TRIM_PASSWORD
Bits
[7:0]
EEPROM_INFO COMMAND
Code 0xF1, block read/write. This command reads the manufacturer’s data from the EEPROM.
Bit Name
CRC checksum
Bit Name
Number of read
bytes returned
Bit Name
Address offset
Bit Name
Page erase
Bit Name
EEPROM
password
Bit Name
Trim password
R/W
R
R/W
R/W
R/W
R/W
R/W
W
R/W
W
R/W
W
Description
Return the CRC checksum value from the EEPROM download operation.
Description
These bits set the number of read bytes returned when using the EEPROM_DATA_xx commands.
Description
These bits set the address offset of the current EEPROM page.
Description
Perform a page erase on the selected EEPROM page. (Wait 35 ms after each page erase operation.)
EEPROM must first be unlocked. Page 0 and Page 1 erase are allowed only in manufacturing test mode.
Description
Write the password to this register to unlock EEPROM and/or to change the EEPROM password.
Description
Write the password to this register to unlock the trim registers for write access. Write the trim password
twice (default 0x00) to unlock the register; write any other value to exit.
Rev. 0 | Page 57 of 84
ADP1047/ADP1048